Dr. Channabasavaraj S

@rrit.ac.in

Professor & HOD/ Mechanical Engineering
R R institute of Technology

Dr. Channabasavaraj S


               Download Compact PDF  
https://researchid.co/sandurchanna

EDUCATION

BE., M.Tech, Ph.D

RESEARCH, TEACHING, or OTHER INTERESTS

Mechanical Engineering, Materials Science, Polymers and Plastics, Surfaces, Coatings and Films
5

Scopus Publications

44

Scholar Citations

4

Scholar h-index

1

Scholar i10-index

Scopus Publications

  • Influence of Wear Parameter on Al7075 Reinforced with TiO2 Subjected to Cryogenic Treatment Using Taguchi’s Approach
    H. Kishore, S. Channabasavaraj
    Aip Conference Proceedings, 2022
    Nano metal matrix composite are obtaining a extensive range of applications in marine, aerospace industry and defense which is due to higher wear resistance, light weight, higher strength, outstanding corrosion resistance and high stiffness. These nano metal matrix composites usually selected for application in the engineering filed since they meet the desired mechanical and wear qualities. In the current research study, preparation of Al7075/TiO2 nano metal matrix composite were done by varying titanium oxide in 0, 1, 3 and 5wt.% through liquid metallurgy route. The cast samples were prepared as per G99 ASTM standard to conduct the wear test. Cryogenic treatment for the prepared specimens were carried out at 196℃ for 24 hrs. The study reveals that increasing wt.% of titanium oxide decrease the wear rate. However, wear rate initiate to be increase with increase in load applied and sliding velocity. Further, Taguchi’s approach is used to evaluate the percentage contribution of wear parameter and to validate the experimental results for wear rate.
  • Influence of Nanosilica on Tensile Properties in Fiber Reinforced Polymer Hybrid Composite Carbon/Kevlar/Epoxy Woven Fiber
    K. G. Pranesh, S. Channabasavaraj
    Aip Conference Proceedings, 2022
    Present work focused on investigation by the influence of adding nanosilica (NS) with epoxy in different weight percentages (wt. %) like 0.5, 1.0, 1.5 and 2.0 on tensile properties in fiber reinforced polymer hybrid nanocomposite having five layers of carbon, four layers of Kevlar woven (0/90o) fiber (5C4K) with epoxy prepared by vacuum assisted resin infusion molding (VARIM) technique. The high-speed shearing method used for better dispersion of the nanosilica in the epoxy resin. The tensile test specimens were prepared as per ASTM D3039 standard to investigate the tensile properties. The results of tested specimens showed that 0.5 wt. % of nanosilica with epoxy composite have higher tensile properties as compared to pure epoxy and other weight percentages.
  • Investigation of flexural properties of hybrid woven Carbon- Kevlar- epoxy composites added with nanosilica filler
    Pranesh K.G., Channabasavaraj S.
    Materials Today Proceedings, 2022
  • Investigations of tensile properties of modified epoxy-based composites reinforced with kenaf/hemp fibers for orthopaedic implants
    H Virupaksha Gouda, S Channabasavaraj, A Thimmana Gouda, G M Siddesh
    Iop Conference Series Materials Science and Engineering, 2020
    The aim of this work intense on study of Femur Bone and compilation of the strength and further parameters of bone and compare the investigational results of the 12%, 18% & 24% NFRPC material with the Femur bone. This study signifying the lowest-weight, lowest-Density and highest-strength Bio composite, biocompatible material utilizes or advises to the Orthopedic Implants particularly for Femur bone. From the investigational results of Tensile strength of all 12%, 18% & 24% NFRPC material will match with femur Bone strength fand recommended these polymers for Femur bone replacement.
  • Experimental investigation on compression and bending properties of epoxy composites reinforced with Al2O3, kenaf/hemp fibers for orthopaedic implants
    H Virupaksha Gouda, S Channabasavaraj, A Thimmana Gouda, K C Mahendra
    Iop Conference Series Materials Science and Engineering, 2020
    Composites in medical sectors are effective and productive phenomena in fulfilling various necessary demands. Through proven results as a base, this technique can be used for further research to enhance the existing parameters. In this connection, present research extensively focuses upon studying the mechanical properties (Compression and Bending) and characterization of fibre reinforced composite materials along with Al2O3 as filler materials. Present study involves the investigation of mechanical properties like compression and bending for NFRPC (Natural Fiber Reinforced Polymer Composite) as bio material, Epoxy resin-LY556 as matrix material, using suitable hardener and natural fibers (Kenaf/Hemp) as reinforcement materials considering Al2O3 as filler material with appropriate percentage to enhance strength and hardness of the composites. Prepared specimens were subjected to (Compression/D-3410 and Bending/D-790) examinations. Later they were compared with the femur bone properties. It was noticed that NFRPC properties will match the femur Bone Strengths and results shows 12, 18 & 24% of NFRPC material are appropriate for orthopaedic implants. From the investigated results finally, it concludes that the mechanical properties like compression and bending will be increased with increasing proportion of fiber in composites.

RECENT SCHOLAR PUBLICATIONS

  • Effect of Reinforcement on Mechanical Properties of Al7475/Nbc/Mos2 Metal Matrix Composites
    BG Chandru, S Channabasavaraj, AT Gouda
    2023
  • Investigating the Influence of Nanosilica and Fiber Layer Sequence on Interlaminar Shear Strength in Carbon-Kevlar-Epoxy Polymer Hybrid Nanocomposite.
    C Pranesh k Gopalkrishnamurthy
    Journal of Composite & Advanced Materials/Revue des Composites et des … , 2023
    2023
    Citations: 3
  • Investigating the Influence of Nanosilica and Fiber Layer Sequence on Interlaminar Shear Strength in Carbon-Kevlar-Epoxy Polymer Hybrid Nanocomposite.
    CS Pranesh K Gopalkrishnamurthy
    Journal of Composite & Advanced Materials/Revue des Composites et des … , 2023
    2023
  • Influence of wear parameter on Al7075 reinforced with TiO2 subjected to cryogenic treatment using Taguchi’s approach
    HKS Channabasavaraj
    AIP Conference Proceedings 2648 (1), 030025-1 - 7 , 2022
    2022
  • Influence of nanosilica on tensile properties in fiber reinforced polymer hybrid composite carbon/kevlar/epoxy woven fiber
    KG Pranesh, S Channabasavaraj
    AIP Conference Proceedings 2648 (1), 030024 , 2022
    2022
    Citations: 2
  • DESIGN OF UNDERWATER REMOTELY OPERATED VEHICLE
    DCSTAAAKBT Borthakur"
    INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH & TECHNOLOGY (IJERT) 10 (10 … , 2022
    2022
  • Investigation of wear Behavior of natural Fiber Reinforced Polymer composite Mterials
    Virupaksha Gouda H, S Channabasavaraj, Somanath Swamy R H M, Dhandin Ramesh ...
    INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH & TECHNOLOGY (IJERT) 10 (Issue … , 2022
    2022
  • Investigation of Dynamic Mechanical Behavior of Nanosilica Filled Carbon-Kevlar-Epoxy Polymer Hybrid Nanocomposite
    PKGC Sandur
    International Information and Engineering Technology Association 46 (3), 141-146 , 2022
    2022
    Citations: 9
  • Investigation of flexural properties of hybrid woven Carbon-Kevlar-epoxy composites added with nanosilica filler
    KG Pranesh, S Channabasavaraj
    Materials Today: Proceedings 62, 5347-5350 , 2022
    2022
    Citations: 9
  • Effect of Reinforcement on Microstructure and Wear Properties of Al7475/Nbc Metal Matrix Composites
    C BG, S Channabasavaraj, DAT Gouda
    Journal of Scholastic Engineering Science and Management 1 (2), 15-26 , 2021
    2021
  • Effect of Reinforcement on Mechanical & wear of Al7475/MoS2 Metal matrix composites
    DTP Mr.Chandru B.G, Dr.S.Channabasavaraj,Dr. A Thimmana Gouda
    Journal of Scholastic Engineering Science & Management 1 (Issue 3), 1-18 , 2021
    2021
  • Investigations of tensile properties of modified epoxy-based composites reinforced with kenaf/hemp fibers for orthopaedic implants
    H Virupaksha Gouda, S Channabasavaraj, A Thimmana Gouda, ...
    IOP Conference Series: Materials Science and Engineering 988 (1), 012127 , 2020
    2020
    Citations: 1
  • Experimental investigation on compression and bending properties of epoxy composites reinforced with Al 2 O 3 , kenaf/hemp fibers for orthopaedic implants
    H Virupaksha Gouda, S Channabasavaraj, AT Gouda, KC Mahendra
    IOP Conference Series: Materials Science and Engineering 988 (1), 012001 , 2020
    2020
    Citations: 3
  • Development & Characterization of Al 7475 / NbC Reinforced Metal Matrix Composites
    DMHS CHANDRU B.G, Dr.S.CHANNABASAVARAJ, Dr.A.THIMMANA GOUDA
    International Journal for Research in Engineering Application & Management … , 2020
    2020
  • Effect of nano materials on Mechanical properties in fiber reinforced Polymer composite - A Review
    CS Pranesh.K.G
    International Research Journal of Engineering & Technology 7 (05), 2727 - 2730 , 2020
    2020
  • Natural Fibers Reinforced Polymer Composite Materials -A Review
    SPJ Virupaksha Gouda.H, Channabasavaraj.S, A.Thimmana Gouda
    International Journal of scientific Research & Review 7 (05), 119 -129 , 2019
    2019
  • Fabrication of ROV detecting the foriegn bodies in under water
    CM Dr.Channabasavaraj.S, Lokesh.B, Gurumurthy.S, Jai Shankar singh
    International Journal of scientific Research and review 7 (05), 876 - 879 , 2019
    2019
  • Composite Leaf Spring for Automobile Suspension System-A Review
    P KG, H Kishore, S Channabasavaraj
    International Journal of scientific Research and review 7 (05), 560-563 , 2019
    2019
  • Effect of Flyash & Graphite reinforced on Tensile & sliding wear properties for metal matrix composites
    MG S.Channabasavaraj, Rajesh Kivade
    2016
  • Evaluation of tensile and flexural properties of polymer matrix composites
    S Channabasavaraju, HK Shivanand, K Santhosh
    International Journal of Modern Engineering Research 3 (5), 3177-3180 , 2013
    2013
    Citations: 12

MOST CITED SCHOLAR PUBLICATIONS

  • Evaluation of tensile and flexural properties of polymer matrix composites
    S Channabasavaraju, HK Shivanand, K Santhosh
    International Journal of Modern Engineering Research 3 (5), 3177-3180 , 2013
    2013
    Citations: 12
  • Investigation of Dynamic Mechanical Behavior of Nanosilica Filled Carbon-Kevlar-Epoxy Polymer Hybrid Nanocomposite
    PKGC Sandur
    International Information and Engineering Technology Association 46 (3), 141-146 , 2022
    2022
    Citations: 9
  • Investigation of flexural properties of hybrid woven Carbon-Kevlar-epoxy composites added with nanosilica filler
    KG Pranesh, S Channabasavaraj
    Materials Today: Proceedings 62, 5347-5350 , 2022
    2022
    Citations: 9
  • Investigation of low velocity impact properties of Kevlar fiber reinforced polymer matrix composites
    S Channabasavaraju, H Shivanand, SS Kumar
    Int. J. Eng. Res. Technol 2, 680-682 , 2013
    2013
    Citations: 5
  • Investigating the Influence of Nanosilica and Fiber Layer Sequence on Interlaminar Shear Strength in Carbon-Kevlar-Epoxy Polymer Hybrid Nanocomposite.
    C Pranesh k Gopalkrishnamurthy
    Journal of Composite & Advanced Materials/Revue des Composites et des … , 2023
    2023
    Citations: 3
  • Experimental investigation on compression and bending properties of epoxy composites reinforced with Al 2 O 3 , kenaf/hemp fibers for orthopaedic implants
    H Virupaksha Gouda, S Channabasavaraj, AT Gouda, KC Mahendra
    IOP Conference Series: Materials Science and Engineering 988 (1), 012001 , 2020
    2020
    Citations: 3
  • Influence of nanosilica on tensile properties in fiber reinforced polymer hybrid composite carbon/kevlar/epoxy woven fiber
    KG Pranesh, S Channabasavaraj
    AIP Conference Proceedings 2648 (1), 030024 , 2022
    2022
    Citations: 2
  • Investigations of tensile properties of modified epoxy-based composites reinforced with kenaf/hemp fibers for orthopaedic implants
    H Virupaksha Gouda, S Channabasavaraj, A Thimmana Gouda, ...
    IOP Conference Series: Materials Science and Engineering 988 (1), 012127 , 2020
    2020
    Citations: 1
  • Effect of Reinforcement on Mechanical Properties of Al7475/Nbc/Mos2 Metal Matrix Composites
    BG Chandru, S Channabasavaraj, AT Gouda
    2023
  • Investigating the Influence of Nanosilica and Fiber Layer Sequence on Interlaminar Shear Strength in Carbon-Kevlar-Epoxy Polymer Hybrid Nanocomposite.
    CS Pranesh K Gopalkrishnamurthy
    Journal of Composite & Advanced Materials/Revue des Composites et des … , 2023
    2023
  • Influence of wear parameter on Al7075 reinforced with TiO2 subjected to cryogenic treatment using Taguchi’s approach
    HKS Channabasavaraj
    AIP Conference Proceedings 2648 (1), 030025-1 - 7 , 2022
    2022
  • DESIGN OF UNDERWATER REMOTELY OPERATED VEHICLE
    DCSTAAAKBT Borthakur"
    INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH & TECHNOLOGY (IJERT) 10 (10 … , 2022
    2022
  • Investigation of wear Behavior of natural Fiber Reinforced Polymer composite Mterials
    Virupaksha Gouda H, S Channabasavaraj, Somanath Swamy R H M, Dhandin Ramesh ...
    INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH & TECHNOLOGY (IJERT) 10 (Issue … , 2022
    2022
  • Effect of Reinforcement on Microstructure and Wear Properties of Al7475/Nbc Metal Matrix Composites
    C BG, S Channabasavaraj, DAT Gouda
    Journal of Scholastic Engineering Science and Management 1 (2), 15-26 , 2021
    2021
  • Effect of Reinforcement on Mechanical & wear of Al7475/MoS2 Metal matrix composites
    DTP Mr.Chandru B.G, Dr.S.Channabasavaraj,Dr. A Thimmana Gouda
    Journal of Scholastic Engineering Science & Management 1 (Issue 3), 1-18 , 2021
    2021
  • Development & Characterization of Al 7475 / NbC Reinforced Metal Matrix Composites
    DMHS CHANDRU B.G, Dr.S.CHANNABASAVARAJ, Dr.A.THIMMANA GOUDA
    International Journal for Research in Engineering Application & Management … , 2020
    2020
  • Effect of nano materials on Mechanical properties in fiber reinforced Polymer composite - A Review
    CS Pranesh.K.G
    International Research Journal of Engineering & Technology 7 (05), 2727 - 2730 , 2020
    2020
  • Natural Fibers Reinforced Polymer Composite Materials -A Review
    SPJ Virupaksha Gouda.H, Channabasavaraj.S, A.Thimmana Gouda
    International Journal of scientific Research & Review 7 (05), 119 -129 , 2019
    2019
  • Fabrication of ROV detecting the foriegn bodies in under water
    CM Dr.Channabasavaraj.S, Lokesh.B, Gurumurthy.S, Jai Shankar singh
    International Journal of scientific Research and review 7 (05), 876 - 879 , 2019
    2019
  • Composite Leaf Spring for Automobile Suspension System-A Review
    P KG, H Kishore, S Channabasavaraj
    International Journal of scientific Research and review 7 (05), 560-563 , 2019
    2019