Dr.D.SINDHANAISELVI

@ptuniv.edu.in

Professor/ Department of Electronics & Instrumentation Engineering
Puducherry Technological University

Dr.D.SINDHANAISELVI


                        Download Compact PDF  
https://researchid.co/sindhanaiselvi

RESEARCH, TEACHING, or OTHER INTERESTS

Electrical and Electronic Engineering, Control and Systems Engineering
24

Scopus Publications

176

Scholar Citations

7

Scholar h-index

5

Scholar i10-index

Scopus Publications

  • Reflective/ Transmissive FSS for Ku/K/Ka Band Satellite Communication
    Safana Amala yazhini A, Pritha Gayathri K, T Shanmuganantham, Sindhanaiselvi D
    2025 IEEE Microwaves Antennas and Propagation Conference Mapcon 2025, 2025
    This study presents a compact and angularly stable Frequency Selective Surface (FSS) structure for K, Ku and Ka frequency band. The unit cell consists of a symmetric six-pointed star-shaped patch with circular metallic slot etched at the outer and inner part of the star. A square loop patch with star helps to achieve dual passband characteristics separated by a single stopband. The dual pass band has been achieved at the 14.6 GHz and 26 GHz due to the star patch and the stopband has been achieved at 20 GHz between the two passband because of the presence of square loop. The work has achieved stable oblique incidence up to 80 degree for both Transverse modes. Owing to its multi-band filtering capability and stable performance under wide-angle incidence, the proposed FSS is highly suitable for electromagnetic shielding and selective transparency in K, Ku- and Ka-band satellite communication systems.
  • Stub-Augmented Low Profile Magneto-Electric Dipole Antenna for Unified 2G to 4G and Sub-6 GHz n78 Band Coverage
    Vadlamudi Roja, Balakrishna Islavath, Indhumathi K, D Sindhanaiselvi, T. Shanmuganantham
    2025 IEEE Microwaves Antennas and Propagation Conference Mapcon 2025, 2025
    This paper presents a novel, low-profile magnetoelectric (ME) dipole antenna optimized for seamless integration across legacy <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$(2 \mathrm{G} / 3 \mathrm{G} / 4 \mathrm{G})$</tex> and emerging 5 G sub- 6 GHz frequency bands, including n78 and portions of the n77 band. The innovative incorporation of vertical stub augmentations into the ME dipole structure enables substantial bandwidth enhancement without increasing the antenna's height or complexity. The proposed design achieves an impressive impedance bandwidth of over <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">$103.32 \%(1.3-4.0$</tex> GHz) with VSWR<2, ensuring broad coverage of key wireless communication standards. Simulation results demonstrate a peak gain exceeding 9.0 dBi and excellent polarization purity, with cross-polarization levels below 20 dB across the operating band. With its compact footprint, wideband performance, and high radiation efficiency, this antenna is ideally suited for nextgeneration base stations and space-constrained wireless access point deployments.
  • Design of Inverted L Shaped MIMO Antenna for 5G Applications
    6th Ursi Regional Conference on Radio Science Ursi Rcrs 2024, 2024
  • High Gain Multilayered Microstrip Patch Antenna for C Band Applications
    International Journal of Microwave and Optical Technology, 2023
  • C-SRR loaded CBCPW fed H-shaped slot radiator for ECG monitoring
    T. Shanmuganantham, D. Sindhanaiselvi, Ashok Kumar Srinivasan
    International Journal of Ultra Wideband Communications and Systems, 2022
  • CB-CPW Fed SRR Loaded ISM and 5G Low Profile Antenna for On-Body Healthcare Monitor
    Thangavelu Shanmuganantham, Srinivasan Ashok Kumar, Dhanapalan Sindhahaiselvi
    Progress in Electromagnetics Research M, 2022
    This paper explores a loaded conductor backed coplanar waveguide (CB-CPW) split ring resonator (SRR) fed U-slot planar antenna used for healthcare monitoring via the wireless scientific industrial medical (ISM) band and medical service band at fifth generation (5G-MSB). The antenna has been designed with bio-tissue layers, muscle layers, skin, and fat. The parameters of the designed antennas, such as miniaturization, increased gain, and enhanced bandwidth, are presented. The proposed prototype results in the total size of 640mm3. Such designed antenna has been operated at (3.4–3.6)GHz — fifth-generation medical service band and at (2.38–2.48)GHz — industrial scientific band and can realize proximately omnidirectional radiation pattern over the operating bands.
  • Design and implementation of compact economic kitchen waste recycler bin
    D. Sindhanaiselvi, T. Shanmuganantham
    Lecture Notes in Electrical Engineering, 2020
  • Implementation of building stability analyzer with earthquake detection using simple mems pressure sensor
    D. Sindhanaiselvi, T. Shanmuganantham
    Lecture Notes in Electrical Engineering, 2020
  • Design and analysis of metamaterial loaded microstrip slotted patch antenna for wireless applications
    K. Sajith, T. Shanmuganantham, D. Sindhahaiselvi
    Lecture Notes in Electrical Engineering, 2020
    The development in the presentation of novel microstrip slotted patch antenna geometry by the use of a circular SRR at the rear side of the ground is proposed. This improved performance has been achieved in the terms of significant addition of bands, better reflection coefficient and enhanced bandwidth and gain at the different resonant frequencies in the final stage design. The prototype has been built through the iterations of a novel geometry, introduction of slots in the second stage and finally the insertion of a split-ring resonator of circular shape at the rear side of the dielectric substrate in the third stage. Coaxial feeding technique has been employed to excite the structure at its fundamental frequency of operation. The slots embedded into the patch structure and the modified ground geometry not only scale the number of resonant frequencies, the corresponding gain and bandwidth but also provide for impedance matching at the different sideband frequencies of resonance. The anticipated prototype possibly will be used for radiolocation purpose at the design frequency of 2.73 GHz and also at the sideband frequencies of 9.11 and 9.32 GHz, fixed satellite at 4.47 and 8.81 GHz, mobile applications except aeronautical mobile at 5.67 and 7.81 GHz and for fixed mobile applications at 7.1 GHz. The final two design stages have been fabricated, and an untried verification has naked their performance to be in close approximation to the simulated ones.
  • Cb-cpw fed srr loaded miniaturized u-slot planar antenna for ecg monitoring
    K. Sajith, T. Shanmuganantham, D. Sindhanaiselvi
    Lecture Notes in Electrical Engineering, 2020
    This paper describes the conductor backed coplanar waveguide (CB-CPW) fed with split ring resonator (SRR) biological planar U-slot antenna for ECG monitoring applications. The antenna is designed through bio-tissue layers like skin, fat, and muscle layers. The designed antenna covers the frequency bands of the industrial scientific medical band (ISM band) 2.36–2.48 GHz and fifth-generation medical service band (5G MSB) 3.4–3.6 GHz. The lowest value return loss is 18 dB at 2.41 GHz and 41 dB at 3.6 GHz for U-slot SRR loaded antenna. The reflection coefficient, voltage standing wave ratio; far-field plots are presented.
  • Design and implementation of indoor tracking system using inertial sensor
    D. Sindhanaiselvi, T. Shanmuganantham
    Lecture Notes in Electrical Engineering, 2019
  • MEMS sensor-based cantilever for intracranial pressure measurement
    N. Kalaiyazhagan, T. Shanmuganantham, D. Sindhanaiselvi
    Lecture Notes in Electrical Engineering, 2019
  • Quad bio-MEMS disease detector (QBDD)
    Beulah Sujan, T. Shanmuganantham, D. Sindhanaiselvi
    Lecture Notes in Electrical Engineering, 2019
  • Energy Efficient Modern Home Using Smart Boards for IoT Energy Automation
    D. Sindhanaiselvi, S. Keerthikaa, T. Shanmuganantham
    2018 International Conference on Circuits and Systems in Digital Enterprise Technology Iccsdet 2018, 2018
  • Study and Analysis of MEMS Based Flowrate and Path Sensor System
    A. Nallathambi, T. Shanmuganantham, D. Sindhanaiselvi
    2018 International Conference on Circuits and Systems in Digital Enterprise Technology Iccsdet 2018, 2018
  • Design and Dimension Optimization of High Sensitive Microcantilever as Humidity Sensor
    B. Priyadarisshini, D. Sindhanaiselvi, T. Shanmuganantham
    Proc IEEE Conference on Emerging Devices and Smart Systems Icedss 2018, 2018
  • Performance analysis of embossed diaphragm based MEMS piezo resistive pressure sensor for flood level measurement
    D. Sindhanaiselvi, T. Shanmuganantham
    Materials Today Proceedings, 2018
  • Design and Analysis of MEMS based Piezoresistive Pressure sensor for Sensitivity Enhancement
    A. Nallathambi, T. Shanmuganantham, D. Sindhanaiselvi
    Materials Today Proceedings, 2018
  • Analysis of RF MEMS Series Switch with Serpentine Spring Shaped Cantilever Beam for Wireless Applications
    R. Raman, T. Shanmuganantham, D. Sindhanaiselvi
    Materials Today Proceedings, 2018
  • Performance Analysis of High Sensitive Microcantilever for Temperature Sensing
    Balasoundirame Priyadarisshini, Dhanabalan Sindhanaiselvi, Thangavelu Shanmuganantham
    Communications in Computer and Information Science, 2018
  • Investigation on performance of piezoelectric beam based MEMS actuator for focussing of micro lens in mobile application
    D. Sindhanaiselvi, T. Shanmuganantham
    IEEE International Conference on Circuits and Systems Iccs 2017, 2017
  • Double boss sculptured diaphragm employed piezoresistive mems pressure sensor with Silicon-On-Insulator (SOI)
    Journal of Engineering Science and Technology, 2017
  • Energy scavenging aspects of cantilever based MEMS piezoelectric pressure sensor
    A. Nallathambi, T. Shanmuganantham, D. Sindhanaiselvi
    Proceedings of IEEE International Conference on Emerging Technological Trends in Computing Communications and Electrical Engineering Icett 2016, 2017
  • Performance analysis of sculptured diaphragm for low pressure MEMS sensors
    D. Sindhanaiselvi, R. Ananda Natarajan, T. Shanmuganantham
    Applied Mechanics and Materials, 2014

RECENT SCHOLAR PUBLICATIONS

  • Stub-Augmented Low Profile Magneto-Electric Dipole Antenna for Unified 2G to 4G and Sub-6 GHz n78 Band Coverage
    V Roja, B Islavath, D Sindhanaiselvi, T Shanmuganantham
    2025 IEEE Microwaves, Antennas, and Propagation Conference (MAPCON), 1-4 , 2025
    2025
  • Design of Inverted L Shaped MIMO Antenna for 5G Applications
    A Joshi, T Shanmuganantham, D Sindhanaiselvi, SA Kumar
    2024 URSI Regional Conference on Radio Science (URSI-RCRS), 1-4 , 2024
    2024
  • High gain multilayered microstrip patch antenna for C band applications
    MD Hannan, T Shanmuganantham, M Shahid, D Sindhanaiselvi, ...
    International Journal of Microwave and Optical Technology 18 (2), 104-111 , 2023
    2023
    Citations: 9
  • CB-CPW fed SRR loaded ISM and 5G low profile antenna for on-body healthcare monitor
    T Shanmuganantham, SA Kumar, D Sindhahaiselvi
    PIER-M 9, 25-38 , 2022
    2022
    Citations: 7
  • C-SRR loaded CBCPW fed H-shaped slot radiator for ECG monitoring
    T Shanmuganantham, D Sindhanaiselvi, AK Srinivasan
    International Journal of Ultra Wideband Communications and Systems 5 (2), 96-102 , 2022
    2022
    Citations: 4
  • Implementation of building stability analyzer with earthquake detection using simple MEMS pressure sensor
    D Sindhanaiselvi, T Shanmuganantham
    Advances in Communication Systems and Networks: Select Proceedings of ComNet … , 2020
    2020
    Citations: 2
  • CB-CPW fed SRR loaded miniaturized U-slot planar antenna for ECG monitoring
    K Sajith, T Shanmuganantham, D Sindhanaiselvi
    Advances in Communication Systems and Networks: Select Proceedings of ComNet … , 2020
    2020
    Citations: 2
  • Design and analysis of metamaterial loaded microstrip slotted patch antenna for wireless applications
    K Sajith, T Shanmuganantham, D Sindhahaiselvi
    Advances in Communication Systems and Networks: Select Proceedings of ComNet … , 2020
    2020
    Citations: 4
  • Design and Implementation of Compact Economic Kitchen Waste Recycler Bin
    D Sindhanaiselvi, T Shanmuganantham
    Advances in Communication Systems and Networks: Select Proceedings of ComNet … , 2020
    2020
    Citations: 2
  • Study and Analysis of MEMS Based Flowrate and Path Sensor System
    A Nallathambi, T Shanmuganantham, D Sindhanaiselvi
    2018 International Conference on Circuits and Systems in Digital Enterprise … , 2018
    2018
    Citations: 1
  • Energy Efficient Modern Home Using Smart Boards for IoT Energy Automation
    D Sindhanaiselvi, S Keerthikaa, T Shanmuganantham
    2018 International Conference on Circuits and Systems in Digital Enterprise … , 2018
    2018
    Citations: 4
  • Design and Dimension Optimization of High Sensitive Micro Cantilever as Humidity Sensor
    TS B.Priyadharshini. D.Sindhanaiselvi
    IEEE International Conference on Emerging Devices and Smart Systems (ICEDSS … , 2018
    2018
  • Design and implementation of indoor tracking system using inertial sensor
    D Sindhanaiselvi, T Shanmuganantham
    Microelectronics, Electromagnetics and Telecommunications: Proceedings of … , 2018
    2018
    Citations: 7
  • MEMS Sensor-Based Cantilever for Intracranial Pressure Measurement
    N Kalaiyazhagan, T Shanmuganantham, D Sindhanaiselvi
    Microelectronics, Electromagnetics and Telecommunications: Proceedings of … , 2018
    2018
    Citations: 3
  • Quad Bio-MEMS Disease Detector (QBDD)
    B Sujan, T Shanmuganantham, D Sindhanaiselvi
    Microelectronics, Electromagnetics and Telecommunications: Proceedings of … , 2018
    2018
  • Performance Analysis of High Sensitive Microcantilever for Temperature Sensing
    B Priyadarisshini, D Sindhanaiselvi, T Shanmuganantham
    International Conference on Soft Computing Systems, 641-648 , 2018
    2018
  • Design and Dimension Optimization of High Sensitive Microcantilever as Humidity Sensor
    B Priyadarisshini, D Sindhanaiselvi, T Shanmuganantham
    2018 Conference on Emerging Devices and Smart Systems (ICEDSS), 53-57 , 2018
    2018
  • Design and analysis of MEMS based piezoresistive pressure sensor for sensitivity enhancement
    A Nallathambi, T Shanmuganantham, D Sindhanaiselvi
    Materials Today: Proceedings 5 (1), 1897-1903 , 2018
    2018
    Citations: 46
  • Analysis of RF MEMS series switch with serpentine spring shaped cantilever beam for wireless applications
    R Raman, T Shanmuganantham, D Sindhanaiselvi
    Materials Today: Proceedings 5 (1), 1890-1896 , 2018
    2018
    Citations: 25
  • Performance analysis of embossed diaphragm based MEMS piezo resistive pressure sensor for flood level measurement
    D Sindhanaiselvi, T Shanmuganantham
    Materials Today: Proceedings 5 (10), 21363-21372 , 2018
    2018
    Citations: 9

MOST CITED SCHOLAR PUBLICATIONS

  • Design and analysis of MEMS based piezoresistive pressure sensor for sensitivity enhancement
    A Nallathambi, T Shanmuganantham, D Sindhanaiselvi
    Materials Today: Proceedings 5 (1), 1897-1903 , 2018
    2018
    Citations: 46
  • Analysis of RF MEMS series switch with serpentine spring shaped cantilever beam for wireless applications
    R Raman, T Shanmuganantham, D Sindhanaiselvi
    Materials Today: Proceedings 5 (1), 1890-1896 , 2018
    2018
    Citations: 25
  • Performance analysis of sculptured diaphragm for low pressure MEMS sensors
    D Sindhanaiselvi, RA Natarajan, T Shanmuganantham
    Applied Mechanics and Materials 592, 2193-2198 , 2014
    2014
    Citations: 12
  • Investigation on performance of piezoelectric beam based MEMS actuator for focussing of micro lens in mobile application
    D Sindhanaiselvi, T Shanmuganantham
    2017 IEEE International Conference on Circuits and Systems (ICCS), 398-403 , 2017
    2017
    Citations: 10
  • Double boss sculptured diaphragm employed piezoresistive MEMS pressure sensor with silicon-on-insulator (SOI)
    D Sindhanaiselvi, T Shanmuganantham
    J Eng Sci Technol 12 (7), 1740-1754 , 2017
    2017
    Citations: 10
  • High gain multilayered microstrip patch antenna for C band applications
    MD Hannan, T Shanmuganantham, M Shahid, D Sindhanaiselvi, ...
    International Journal of Microwave and Optical Technology 18 (2), 104-111 , 2023
    2023
    Citations: 9
  • Performance analysis of embossed diaphragm based MEMS piezo resistive pressure sensor for flood level measurement
    D Sindhanaiselvi, T Shanmuganantham
    Materials Today: Proceedings 5 (10), 21363-21372 , 2018
    2018
    Citations: 9
  • CB-CPW fed SRR loaded ISM and 5G low profile antenna for on-body healthcare monitor
    T Shanmuganantham, SA Kumar, D Sindhahaiselvi
    PIER-M 9, 25-38 , 2022
    2022
    Citations: 7
  • Design and implementation of indoor tracking system using inertial sensor
    D Sindhanaiselvi, T Shanmuganantham
    Microelectronics, Electromagnetics and Telecommunications: Proceedings of … , 2018
    2018
    Citations: 7
  • Design and optimization of low pressure sculptured diaphragm with burst pressure, stress analysis and its enhancement
    D Sindhanaiselvi, T Shanmuganantham
    International Journal of Applied Engineering Research 10 (24), 21075-21081 , 2015
    2015
    Citations: 7
  • Design and analysis of low pressure MEMS sensor
    D Sindhanaiselvi
    2015
    Citations: 6
  • C-SRR loaded CBCPW fed H-shaped slot radiator for ECG monitoring
    T Shanmuganantham, D Sindhanaiselvi, AK Srinivasan
    International Journal of Ultra Wideband Communications and Systems 5 (2), 96-102 , 2022
    2022
    Citations: 4
  • Design and analysis of metamaterial loaded microstrip slotted patch antenna for wireless applications
    K Sajith, T Shanmuganantham, D Sindhahaiselvi
    Advances in Communication Systems and Networks: Select Proceedings of ComNet … , 2020
    2020
    Citations: 4
  • Energy Efficient Modern Home Using Smart Boards for IoT Energy Automation
    D Sindhanaiselvi, S Keerthikaa, T Shanmuganantham
    2018 International Conference on Circuits and Systems in Digital Enterprise … , 2018
    2018
    Citations: 4
  • MEMS Sensor-Based Cantilever for Intracranial Pressure Measurement
    N Kalaiyazhagan, T Shanmuganantham, D Sindhanaiselvi
    Microelectronics, Electromagnetics and Telecommunications: Proceedings of … , 2018
    2018
    Citations: 3
  • Energy scavenging aspects of cantilever based MEMS piezoelectric pressure sensor
    A Nallathambi, T Shanmuganantham, D Sindhanaiselvi
    2016 International Conference on Emerging Technological Trends (ICETT), 1-6 , 2016
    2016
    Citations: 3
  • Analytical modelling of low pressure single boss sculptured diaphragm and its sensitivity enhancement
    D Sindhanaiselvi, T Shanmuganantham
    ICTACT Journal on Microelectronics 1 (3), 124-130 , 2015
    2015
    Citations: 3
  • Implementation of building stability analyzer with earthquake detection using simple MEMS pressure sensor
    D Sindhanaiselvi, T Shanmuganantham
    Advances in Communication Systems and Networks: Select Proceedings of ComNet … , 2020
    2020
    Citations: 2
  • CB-CPW fed SRR loaded miniaturized U-slot planar antenna for ECG monitoring
    K Sajith, T Shanmuganantham, D Sindhanaiselvi
    Advances in Communication Systems and Networks: Select Proceedings of ComNet … , 2020
    2020
    Citations: 2
  • Design and Implementation of Compact Economic Kitchen Waste Recycler Bin
    D Sindhanaiselvi, T Shanmuganantham
    Advances in Communication Systems and Networks: Select Proceedings of ComNet … , 2020
    2020
    Citations: 2