Iput Kasiyanto

@brin.go.id

Research Center for Testing Technology and Standard
National Research dan Innovation Agency (BRIN)

Iput Kasiyanto


                  Download Compact PDF  
https://researchid.co/iputbrin2024

RESEARCH, TEACHING, or OTHER INTERESTS

Multidisciplinary, Control and Systems Engineering, Energy
14

Scopus Publications

40

Scholar Citations

3

Scholar h-index

1

Scholar i10-index

Scopus Publications

  • Methods for Leakage Monitoring for Safety and Efficiency of ORC System: A Review
    Ihsan Supono, Teguh Pribadi Adinugroho, Himma Firdaus, Iput Kasiyanto, Tri Widianti, Qudsiyyatul Lailiyah, Nanang Kusnandar, Tri Rakhmawati, Sih Damayanti, Meilinda Ayundyahrini, Teguh Muttaqie
    Evergreen, 2026
    Organic Rankine Cycles (ORCs) are widely used for recovering low-temperature waste heat, particularly in renewable energy systems like biomass.However, their performance is often reduced by undetected heat and gas leakage.This review aims to identify, classify, and assess current leakage detection methods specifically suited for ORC systems, focusing on their effectiveness under typical operating conditions.The scope encompasses thermal and gas leakage detection techniques, including temperature, pressure, and flow rate monitoring, as well as advanced diagnostic technologies.The main findings indicate that heat loss from components, such as the expander, and undetected vapor leakage can significantly degrade system efficiency and output.Continuous temperature, pressure, and flow rate monitoring are the most effective methods for ensuring safety and optimizing system performance, among the reviewed options.Integrating these techniques with Internet of Things (IoT) devices and machine learning offers promising avenues for real-time diagnostics and predictive maintenance.Future research should focus on developing cost-effective, robust sensors suitable for high-temperature and high-humidity environments common in ORCs.This review contributes to the broader discussion on improving ORC monitoring and reliability while proposing practical pathways for technological innovation and sustainable energy conversion.
  • Glow-Wire Analysis of Polypropylene Blends for Mechanical and Marine Engineering Applications
    Himma Firdaus, Ihsan Supono, Anandito Adam Pratama, Iwan Istanto, Aditya Rio Prabowo, Nanang Kusnandar, Iput Kasiyanto, Rahman Wijaya, Qudsiyyatul Lailiyah, Eko Prasetya Budiana, Indri Yaningsih, Hammar Ilham Akbar, Fahmi Imanullah
    Civil Engineering Journal Iran, 2025
    Polymer materials are widely used due to their versatility; however, their vulnerability to fire is a significant concern, especially under electrical influences on engineered mechanical designs and marine structure applications. This study examines the fire resistance of a polypropylene (PP) blend using Glow-Wire Flammability Index (GWFI) and Glow-Wire Ignition Temperature (GWIT) tests. While previous research typically relies on flame-retardants to address flammability, this work proposes using a simple 1:1 weight ratio blend of two distinct PP types. This specific PP blend was selected to provide balanced material properties and improved processing consistency. The results from glow-wire tests were compared with previous findings to evaluate flammability performance. Our findings reveal that although the PP blend offers enhanced fire resistance compared to neat PP, it remains inferior to PP-containing flame-retardant additives. The outcomes suggest that this blended PP may be suitable for applications where mechanical properties, cost-effectiveness, and recyclability precede fire resistance, such as engineered automotive interiors, mechanical design of marine transportation, and low-risk electrical components in engineering infrastructure. This initial research contributes valuable insights into the fire behavior of PP blends. Moreover, it establishes a foundation for future investigations into polymer fire resistance, encouraging additional glow-wire testing on other polymer systems.
  • Polymer characteristics and additive effects on fire resistance in glow-wire test performance: Part II - Deployed material and regulation
    Anandito Adam Pratama, Aditya Rio Prabowo, Teguh Muttaqie, Ihsan Supono, Nurul Muhayat, Eko Prasetya Budiana, Hammar Ilham Akbar, Iput Kasiyanto, Qudsiyyatul Lailiyah
    Procedia Structural Integrity, 2025
    The study aims to assess the characteristics of the combination of polymers and additives, and it is followed by a discussion on evaluating compliance with fire resistance standards. Furthermore, flame-retardant materials, such as aluminum diethyl-phosphinate (AlPi), ammonium polyphosphate (APP), and glass fibers, are considered to improve the fire resistance of polymers. The results show that while specific polymers, including polypropylene (PP) and polycarbonate (PC), achieve high GWFI values when combined with flame-retardant additives, not all materials withstand the maximum glow-wire test temperature.
  • Evaluation of Measurement Uncertainty Using the Monte Carlo Method in Steady-State Power Measurement of Household Refrigerator Based on IEC 62552:2015
    N Kusnandar, Q Lailiyah, I Kasiyanto, D Mandaris, H Firdaus, I Supono
    Evergreen, 2024
    Measurement uncertainty is essential for accurate comparison and decision-making in various fields.The ISO/IEC GUM standardizes uncertainty estimation, yet traditional methods like the Law of Propagation of Uncertainties (LPU) face limitations.The Monte Carlo Method (MCM) offers a solution, especially for complex models.Our study explores MCM's application in refrigerator power measurement, overcoming challenges encountered with traditional methods.Three MCM methodologies-a priori, adaptive with 1 or 2 significant decimal digits-were tested.The findings reveal that while all three methods yield relatively similar results-51.3 estimated measured power with a standard uncertainty of 1.44 -the a priori method with = 10 6 and the adaptive method with 2 significant decimal digits exhibit greater stability compared to the adaptive method with 1 significant decimal digit.This underscores MCM's effectiveness in handling intricate uncertainties and its potential for advancing measurement reliability and quality.
  • Performance evaluation of test fixtures for vibration testing of electric vehicle batteries
    Nanang Kusnandar, Himma Firdaus, Iput Kasiyanto, Bayu Utomo, Ihsan Supono, Qudsiyyatul Lailiyah
    Aip Conference Proceedings, 2024
  • Measurement of specific absorption rate of wearable wireless devices
    Wuwus Ardiatna, Haryo Dwi Prananto, Irawan Sukma, Iput Kasiyanto, Aditia Nur Bakti, Ihsan Supono, Priyo Wibowo, R. Harry Arjadi
    Aip Conference Proceedings, 2024
  • Investigation of environmental disturbances in the performance of IR-thermometer verification system
    Ihsan Supono, Nanang Kusnandar, Himma Firdaus, Iput Kasiyanto, Bayu Utomo, Qudsiyyatul Lailiyah, Hidayat Wiriadinata, Prayoga Bakti
    Aip Conference Proceedings, 2024
  • Bibliometric review of measurement uncertainty: Research classification and future tendencies
    Nanang Kusnandar, Himma Firdaus, Ihsan Supono, Bayu Utomo, Iput Kasiyanto, Qudsiyyatul Lailiyah
    Measurement Journal of the International Measurement Confederation, 2024
  • A Tutorial to Implement a BLDC Motor Speed Control for an Electric Boat Using Simscape and Simulink
    Iput Kasiyanto, Himma Firdaus, Ihsan Supono, Nanang Kusnandar, Qudsiyyatul Lailiyah, Teguh Muttaqie
    2024 14th International Conference on System Engineering and Technology Icset 2024 Proceeding, 2024
    The marine sector is moving towards all-electric ships to improve energy efficiency and reduce air pollution. A key part of an electric propulsion system for an electric ship is the electric motor, especially permanent magnet motors, known for their high torque and efficiency. Recently, brushless DC (BLDC) permanent magnet motors have rapidly advanced, matching the pace of electric boat development. These motors are preferred for their efficiency, reliability, and low maintenance, making them suitable for varying water conditions. Despite much research on BLDC motor modeling, there are few tutorial-style guides. This paper offers a step-by-step tutorial for using Simscape and Simulink to control BLDC motors in electric boats. The simulation results demonstrate excellent speed tracking, closely matching the desired speed without overshooting. The system swiftly adjusts to rapid speed changes during acceleration and deceleration, which is essential for applications requiring quick adjustments. This guide helps engineers and researchers design, test, and optimize motor control systems, promoting efficient and sustainable electric boating solutions.
  • Performance Evaluation of High-Energy LiFePO4Battery Pack for Electric Shuttle
    Himma Firdaus, Ihsan Supono, Qudsiyyatul Lailiyah, Iput Kasiyanto, Nanang Kusnandar, Rizky Hanifa, Riky Alam Ma’arif, Fadjar Rahino Triputra, Michael Andreas Purwoadi, Sasono Rahardjo, Lesti Setianingrum, Maratul Hamidah, Mustika Fitriana Dewi, Edhi Purnomo, Wagiyo Honggowiranto
    Iop Conference Series Earth and Environmental Science, 2024
    For tourism-based electric shuttles, high-energy batteries are crucial. A 200 Ah Lithium Iron Phosphate (LiFePO4) battery pack has been designed yet lacks performance evaluation. We conducted performance tests based on ISO 12405-4:2018. The battery comprises 24 cells connected in series, resulting in a 72 V output voltage. Under controlled conditions at 23°C, the test assessed charging and discharging at defined C-rates. The study assessed the resistance, capacity, and efficiency. We also monitored heat distribution in the battery system during test to detect abnormalities. The results revealed that the maximum attainable battery charge rate was C/3. Under this rate, the discharge capacity reached 160 Ah, and the battery temperature rose to just below 36.2°C. On the other hand, charging the battery at C/6 yielded 191.5 Ah, which increased the battery temperature to 31°C. Thus, the energy round-trip efficiency was measured at 86.5%. However, charging the battery at C/3 led to the Battery Management System (BMS) overheating, indicated by the casing temperature exceeding 67 °C. The overheating caused severe damage to the BMS charging component and triggered an automatic cut-off. The higher total battery resistance during charging was identified as the root cause of the issue, emphasizing the need for future research to focus on enhancing the BMS for faster and more efficient charging, improving the service reliability of the electric shuttle.
  • The Effect of Upper and Lower Limit Pressure on the Thermal Performance of Liquefied Petroleum Gas Stove
    Qudsiyyatul Lailiyah, Bayu Utomo, Himma Firdaus, Intan Paramudita, Nanang Kusnandar, Ihsan Supono, Iput Kasiyanto, Hidayat Wiriadinata
    Evergreen, 2023
  • Advanced Control for Hammerstein-bilinear HVAC System
    Iput Kasiyanto
    ACM International Conference Proceeding Series, 2022
  • Comparison of GUM and Monte Carlo Methods for Measurement Uncertainty Estimation of the Energy Performance Measurements of Gas Stoves
    Bayu Utomo, Nanang Kusnandar, Himma Firdaus, Intan Paramudita, Iput Kasiyanto, Qudsiyyatul Lailiyah, Wahyudin P. Syam
    Measurement Science Review, 2022
  • Automation Testing System for Energy Efficiency of Electric Fan Based on SNI IEC 60789:2013
    Q Lailiyah, P Bakti, N Kusnandar, I Kasiyanto, H Tjahjono, I Muchlis
    Iop Conference Series Materials Science and Engineering, 2018

RECENT SCHOLAR PUBLICATIONS

  • Methods for Leakage Monitoring for Safety and Efficiency of ORC System: A Review
    I Supono, TP Adinugroho, H Firdaus, I Kasiyanto, T Widianti, Q Lailiyah, ...
    Evergreen 13 (2), 547-568 , 2026
    2026
  • Glow-Wire Analysis of Polypropylene Blends for Mechanical and Marine Engineering Applications
    H Firdaus, I Supono, AA Pratama, I Istanto, AR Prabowo, N Kusnandar, ...
    Civil Engineering Journal 11 (7), 2953-2968 , 2025
    2025
    Citations: 3
  • Polymer characteristics and additive effects on fire resistance in glow-wire test performance: Part II–Deployed material and regulation
    AA Pratama, AR Prabowo, T Muttaqie, I Supono, N Muhayat, EP Budiana, ...
    Procedia Structural Integrity 72, 377-382 , 2025
    2025
  • A Tutorial to Implement a BLDC Motor Speed Control for an Electric Boat Using Simscape and Simulink
    I Kasiyanto, H Firdaus, I Supono, N Kusnandar, Q Lailiyah, T Muttaqie
    2024 14th International Conference on System Engineering and Technology … , 2024
    2024
  • Measurement of specific absorption rate of wearable wireless devices
    W Ardiatna, HD Prananto, I Sukma, I Kasiyanto, AN Bakti, I Supono, ...
    AIP Conference Proceedings 3069 (1), 020060 , 2024
    2024
  • Performance evaluation of test fixtures for vibration testing of electric vehicle batteries
    N Kusnandar, H Firdaus, I Kasiyanto, B Utomo, I Supono, Q Lailiyah
    AIP Conference Proceedings 3069 (1), 020074 , 2024
    2024
    Citations: 2
  • Investigation of environmental disturbances in the performance of IR-thermometer verification system
    I Supono, N Kusnandar, H Firdaus, I Kasiyanto, B Utomo, Q Lailiyah, ...
    AIP Conference Proceedings 3069 (1), 020062 , 2024
    2024
  • Performance Evaluation of High-Energy LiFePO4 Battery Pack for Electric Shuttle
    H Firdaus, I Supono, Q Lailiyah, I Kasiyanto, N Kusnandar, R Hanifa, ...
    IOP Conference Series: Earth and Environmental Science 1344 (1), 012024 , 2024
    2024
    Citations: 3
  • Bibliometric review of measurement uncertainty: Research classification and future tendencies
    N Kusnandar, H Firdaus, I Supono, B Utomo, I Kasiyanto, Q Lailiyah
    Measurement 232, 114636 , 2024
    2024
    Citations: 17
  • Advanced Control for Quadruple Tank Process
    I Kasiyanto, H Firdaus, Q Lailiyah, I Supono, N Kusnandar, I Supono
    Jurnal Ilmiah Teknik Elektro Komputer dan Informatika (JITEKI) 10 (1), 1-16 , 2024
    2024
    Citations: 1
  • Evaluation of Measurement Uncertainty Using the Monte Carlo Method in Steady-State Power Measurement of Household Refrigerator Based on IEC 62552: 2015
    N Kusnandar, Q Lailiyah, I Kasiyanto, D Mandaris, H Firdaus, I Supono
    Transdisciplinary Research and Education Center for Green Technologies … , 2024
    2024
  • The effect of upper and lower limit pressure on the thermal performance of liquefied petroleum gas stove
    Q Lailiyah, B Utomo, H Firdaus, I Paramudita, N Kusnandar, I Supono, ...
    Transdisciplinary Research and Education Center for Green Technologies … , 2023
    2023
    Citations: 2
  • Advanced Control for Hammerstein-bilinear HVAC System
    I Kasiyanto
    Proceedings of the 2022 International Conference on Computer, Control … , 2022
    2022
    Citations: 2
  • Comparison of GUM and Monte Carlo methods for measurement uncertainty estimation of the energy performance measurements of gas stoves
    B Utomo, N Kusnandar, H Firdaus, I Paramudita, I Kasiyanto, Q Lailiyah, ...
    Measurement Science Review 22 (4), 160-169 , 2022
    2022
    Citations: 7
  • Disain Pengendali Prediktif pada Sistem HVAC Berbasis Model Hammerstein Bilinear
    I Kasiyanto
    Master’s thesis. Universitas Indonesia, Depok, Indonesia. https://doi. org … , 2021
    2021
    Citations: 1
  • Model Predictive Control of Precision Air Conditioning System with Secondary Condenser
    I Kasiyanto, A Subiantoro
    ICESSD 2019: Proceedings of the 1st International Conference on … , 2020
    2020
    Citations: 1
  • Desain Sistem Pengendali Motor DC untuk Uji Nyala Api Berdasarkan SNI 7368: 2011
    P Bakti, I Kasiyanto, Q Lailiyah
    Pertemuan dan Presentasi Ilmiah Standardisasi 2019, 291-296 , 2019
    2019
  • ANALISIS PENENTUAN DAYA DAN TEMPERATUR KONDISI TUNAK PADA PENGUJIAN KONSUMSI ENERGI LEMARI PENDINGIN BERDASARKAN IEC 62552: 2015
    N Kusnandar, P Bakti, I Kasiyanto, Q Lailiyah
    Jurnal Standardisasi 20 (3), 197-206 , 2019
    2019
  • Metode Analitik Berbasis Filter Kalman Dengan Persamaan Constraint Linear State
    I Kasiyanto
    Bunga Rampai Iptek Penerbangan dan Antariksa: Progres Litbangyasa Roket … , 2019
    2019
  • Automation Testing System for Energy Efficiency of Electric Fan Based on SNI IEC 60789: 2013
    Q Lailiyah, P Bakti, N Kusnandar, I Kasiyanto, H Tjahjono, I Muchlis
    IOP Conference Series: Materials Science and Engineering 384 (1), 012056 , 2018
    2018
    Citations: 1

MOST CITED SCHOLAR PUBLICATIONS

  • Bibliometric review of measurement uncertainty: Research classification and future tendencies
    N Kusnandar, H Firdaus, I Supono, B Utomo, I Kasiyanto, Q Lailiyah
    Measurement 232, 114636 , 2024
    2024
    Citations: 17
  • Comparison of GUM and Monte Carlo methods for measurement uncertainty estimation of the energy performance measurements of gas stoves
    B Utomo, N Kusnandar, H Firdaus, I Paramudita, I Kasiyanto, Q Lailiyah, ...
    Measurement Science Review 22 (4), 160-169 , 2022
    2022
    Citations: 7
  • Glow-Wire Analysis of Polypropylene Blends for Mechanical and Marine Engineering Applications
    H Firdaus, I Supono, AA Pratama, I Istanto, AR Prabowo, N Kusnandar, ...
    Civil Engineering Journal 11 (7), 2953-2968 , 2025
    2025
    Citations: 3
  • Performance Evaluation of High-Energy LiFePO4 Battery Pack for Electric Shuttle
    H Firdaus, I Supono, Q Lailiyah, I Kasiyanto, N Kusnandar, R Hanifa, ...
    IOP Conference Series: Earth and Environmental Science 1344 (1), 012024 , 2024
    2024
    Citations: 3
  • Performance evaluation of test fixtures for vibration testing of electric vehicle batteries
    N Kusnandar, H Firdaus, I Kasiyanto, B Utomo, I Supono, Q Lailiyah
    AIP Conference Proceedings 3069 (1), 020074 , 2024
    2024
    Citations: 2
  • The effect of upper and lower limit pressure on the thermal performance of liquefied petroleum gas stove
    Q Lailiyah, B Utomo, H Firdaus, I Paramudita, N Kusnandar, I Supono, ...
    Transdisciplinary Research and Education Center for Green Technologies … , 2023
    2023
    Citations: 2
  • Advanced Control for Hammerstein-bilinear HVAC System
    I Kasiyanto
    Proceedings of the 2022 International Conference on Computer, Control … , 2022
    2022
    Citations: 2
  • Advanced Control for Quadruple Tank Process
    I Kasiyanto, H Firdaus, Q Lailiyah, I Supono, N Kusnandar, I Supono
    Jurnal Ilmiah Teknik Elektro Komputer dan Informatika (JITEKI) 10 (1), 1-16 , 2024
    2024
    Citations: 1
  • Disain Pengendali Prediktif pada Sistem HVAC Berbasis Model Hammerstein Bilinear
    I Kasiyanto
    Master’s thesis. Universitas Indonesia, Depok, Indonesia. https://doi. org … , 2021
    2021
    Citations: 1
  • Model Predictive Control of Precision Air Conditioning System with Secondary Condenser
    I Kasiyanto, A Subiantoro
    ICESSD 2019: Proceedings of the 1st International Conference on … , 2020
    2020
    Citations: 1
  • Automation Testing System for Energy Efficiency of Electric Fan Based on SNI IEC 60789: 2013
    Q Lailiyah, P Bakti, N Kusnandar, I Kasiyanto, H Tjahjono, I Muchlis
    IOP Conference Series: Materials Science and Engineering 384 (1), 012056 , 2018
    2018
    Citations: 1
  • Methods for Leakage Monitoring for Safety and Efficiency of ORC System: A Review
    I Supono, TP Adinugroho, H Firdaus, I Kasiyanto, T Widianti, Q Lailiyah, ...
    Evergreen 13 (2), 547-568 , 2026
    2026
  • Polymer characteristics and additive effects on fire resistance in glow-wire test performance: Part II–Deployed material and regulation
    AA Pratama, AR Prabowo, T Muttaqie, I Supono, N Muhayat, EP Budiana, ...
    Procedia Structural Integrity 72, 377-382 , 2025
    2025
  • A Tutorial to Implement a BLDC Motor Speed Control for an Electric Boat Using Simscape and Simulink
    I Kasiyanto, H Firdaus, I Supono, N Kusnandar, Q Lailiyah, T Muttaqie
    2024 14th International Conference on System Engineering and Technology … , 2024
    2024
  • Measurement of specific absorption rate of wearable wireless devices
    W Ardiatna, HD Prananto, I Sukma, I Kasiyanto, AN Bakti, I Supono, ...
    AIP Conference Proceedings 3069 (1), 020060 , 2024
    2024
  • Investigation of environmental disturbances in the performance of IR-thermometer verification system
    I Supono, N Kusnandar, H Firdaus, I Kasiyanto, B Utomo, Q Lailiyah, ...
    AIP Conference Proceedings 3069 (1), 020062 , 2024
    2024
  • Evaluation of Measurement Uncertainty Using the Monte Carlo Method in Steady-State Power Measurement of Household Refrigerator Based on IEC 62552: 2015
    N Kusnandar, Q Lailiyah, I Kasiyanto, D Mandaris, H Firdaus, I Supono
    Transdisciplinary Research and Education Center for Green Technologies … , 2024
    2024
  • Desain Sistem Pengendali Motor DC untuk Uji Nyala Api Berdasarkan SNI 7368: 2011
    P Bakti, I Kasiyanto, Q Lailiyah
    Pertemuan dan Presentasi Ilmiah Standardisasi 2019, 291-296 , 2019
    2019
  • ANALISIS PENENTUAN DAYA DAN TEMPERATUR KONDISI TUNAK PADA PENGUJIAN KONSUMSI ENERGI LEMARI PENDINGIN BERDASARKAN IEC 62552: 2015
    N Kusnandar, P Bakti, I Kasiyanto, Q Lailiyah
    Jurnal Standardisasi 20 (3), 197-206 , 2019
    2019
  • Metode Analitik Berbasis Filter Kalman Dengan Persamaan Constraint Linear State
    I Kasiyanto
    Bunga Rampai Iptek Penerbangan dan Antariksa: Progres Litbangyasa Roket … , 2019
    2019