B. VINOD

Scopus Publications

Hot Deformation Characteristics and Tool Wear Morphology of GH4169 Super Alloy: A Frugal Usage of Cryogenic Cooling During Turning Process
B. Vinod, P. Sudhakiran, S. Sunil Kumar Reddy, Baburao Pasupulati
Journal of the Institution of Engineers India Series D, 2026
Optimization and Assessment of CoCrFeMnTi High Entropy Alloy: Novel Strategy to Enhance Electrical and Mechanical Characteristics
Ravindra S, B Vinod, Mike Dison E, Pasupulati Baburao
Proceedings of the 4th IEEE International Conference on Interdisciplinary Approaches in Technology and Management for Social Innovation Iatmsi 2026, 2026
In the recent era of aeronautical and marine engineering, many applications are required to produce heavy components for the industry. In this study, CoCrFeMnTi is chosen as the matrix due to its good plasticity, high ductility, and low-temperature strength. To improve thermal stability, niobium ceramic (NbCx) is used as a reinforcement with varying weight fractions (x =3,6,9%), and was synthesized using the selective laser melting method. The test results showed that increasing the reinforcement content improved mechanical properties and thermal properties. The CoCrFeMnTi with a 6% NbC exhibits high tensile strength and hardness of 983 MPa and 345 MPa, respectively. Meanwhile, adding 6% NbC improved the thermal conductivity and achieved a high thermal resistance suitable for cryogenic applications. Our work will provide a new perspective on utilizing the rapid solidification process of SLM and ceramic material reinforcement to enhance the mechanical properties of HEAs, which have great potential.
Assessing the In Vitro Biocompatibility and Tribological Properties of WE 43 Alloy Using GelMA Hydrogel Coatings: Effect of Silica Doped with Hydroxyapatite
B. Vinod, Ranga Jarabala, S. Ravindra, K. Anjani Devi, Pasupuleti Baburao
Journal of Materials Engineering and Performance, 2026
Tribological and vitro biocompatibility of WE 43 alloy: impact of silica-doped with hydroxyapatite for orthopaedic applications
B. Vinod, Sudhakiran Ponnuru, P. Sivamurugan, Rajesh Ella, Baburao Pasupuleti
Journal of the Australian Ceramic Society, 2026
Assessment and Investigation of GH4169 Superalloy: A Frugal Innovative Attempt to Identify Dominant Lubricant Fluid under Dry and Wet Conditions
B R Vinod, S. Suresh, S. Sunil Kumar Reddy, R. Prakash
Journal of Materials Engineering and Performance, 2025
Fabrication and Characterization of Ti-Al-Cr-Nb Alloy by Casting Technique: Microstructural Evolution and Implications for Surface Mechanisms †
B. Madhusudhana Reddy, S. Sunil Kumar Reddy, B. Vinod
Engineering Proceedings, 2025
Advanced engineering materials are in high demand for a combination of tailored properties in a single material. Titanium with aluminum alloys is widely used to prepare pistons and knee joints due to its high strength and abundant availability. The primary focus of the study was to utilize an eco-friendly composite material with low cost and a simple production process. Ti–48Al–2Cr–2Nb with molybdenum disulfide was added as reinforcement in varying percentages, fabricated using the squeeze casting production technique. The dry sliding wear test was performed. Adding 4% molybdenum disulfide to Ti–48Al–2Cr–2Nb enhanced its mechanical properties and wear resistance by 57%.
Extraction and Performance of Novel Lignocellulose from Agro-Wastes: Synergistic Integration of Waste into Ecofriendly Polymer Composites
B Vinod, B.S. Venkatesh Murthy, Velumayil Ramesh, P. Venkataramana
Key Engineering Materials, 2025
This research focuses on reusing waste materials to reduce the demand for fresh raw materials, thereby preserving natural resources. This approach also minimizes the energy and greenhouse gas emissions of extracting and manufacturing raw materials. We are developing eco-friendly, versatile polymer composites, aligning with the circular economy movement's goals of promoting sustainable resource utilization and waste minimization through closed-loop product life cycles. This research uses a hybrid polymer reinforced with lignocellulose agro-fibers (LCAF) from vegetable waste residues. Three different agro-wastes, such as orange peels, jute, and palmyra fruit peduncle, have been used. It investigates two phases, initially different fiber ratios from 3 to 12% and varying fiber lengths from 5 to 20 mm in the secondary phase, respectively. The LCAF is obtained through mechanical and chemical pre-treatment to enhance its properties for use in food packaging. The fiber containing 9% LCAF demonstrated a superior hardness and tensile strength of 118 BHN and 63 MPa compared to the polyester matrix. The water absorption improved from 2.03% to 4.76%, depending on the type of raw material and pre-treatment used to produce the LCAFs.
Investigation of Electrical Characteristics and Hot Tensile Deformation Behaviour: Novel Assessment of Similar Joints by FSW technique
K. Sai Sujith, S. Ravi, B. Vinod, Baburao Pasupuleti
2025 8th International Conference on Circuit Power and Computing Technologies Iccpct 2025, 2025
Recently, there has been a significant demand for smart metals in various manufacturing sectors, especially within the nuclear industry, where they are preferred for their efficiency as external shield packaging. A study was carried out to examine the hot deformation behaviors of Ti6321 and SS 310 using hot tensile tests conducted at varying temperatures ($300,350,400^{\circ} \mathrm{C}$) and strain rates (0.01,0.1, and $1 \mathrm{~s}^{-1}$). The study used consecutive equations to examine the effect of stress, strain rate, and temperature. The findings indicated that the flow stress of similar joints diminishes with increased deformation temperatures and reduced strain rates. The Johnson-Cook model effectively represents the thermal flow characteristics of the test alloy, which, after being deformed at $400^{\circ} \mathrm{C}$, exhibits ductility, including elongated grain structures and a high concentration of deep cavities. A high-density dislocation structure was noted due to plastic deformation, with dislocation annihilation becoming more pronounced at elevated temperatures. The similar TiTi 6321 weld joint exhibits improved electrical resistance, and the resistivity of axis $\mathbf{I}$ is $\mathbf{6. 6 7} \times \mathbf{1 0 - 5}$ and $\mathbf{3. 1 9} \times \mathbf{1 0 - 8}$ with a high percentage of 74.66% compared to other welded joints. Additionally, precipitates were observed in the alloy following high-temperature testing.
Wear behaviour and coating performance of WC–Cu composite electrodes on ZE41A magnesium alloy using electrospark deposition
U. Elaiyarasan, P. Baranitharan, V. Satheeshkumar, C. Senthilkumar, B. Vinod
Canadian Metallurgical Quarterly, 2025
Magnesium alloys, being relatively softer than other structural metal, has lower hardness and is prone to wear under abrasive and frictional conditions. To enhance their wear and abrasion resistance, tungsten carbide-copper (WC-Cu) composite coating was developed on ZE41A magnesium alloy using electro-spark deposition (ESD). The composite electrodes, with combinations of 50:50 and 70:30 was prepared using powder metallurgy. ESD parameters, including spark current (SC), pulse-on time (Ton) and pulse-off time (Toff) were selected for coating. Wear behaviour was evaluated using pin-on-disc tribometer under varying sliding parameters; applied load (20N–40N), sliding speed (150 rpm–350 rpm), and sliding time (5 min–9 min). The WC70:Cu30 electrode coating exhibited the highest CR of 0.00298 gm/min and maximum layer thickness of 92.12 μm, attributed to thermal conductivity of tungsten. EDS analysis confirmed higher deposition of Cu (18.68%) and WC (3.58%) in the WC70:Cu30 coating compared to WC50:Cu50, which showed Cu (11.33%) and WC (3.06%). The lowest WR of 0.000185 mm3/min was achieved with the WC70:Cu30 coating due to higher WC deposition. SEM analysis revealed wear mechanisms such as scratch, delamination, grooves, and adhesive wear. The WC70:Cu30 composite electrode improved performance with higher CR and lower WR compared to WC50:Cu50.
Enhancing Structural Analysis and Tensile Properties of HDPE Composites Incorporating Glass Micro-balloons and Crumb Rubber Fillers
B. B. Ganesha, B. Vinod, H. Shivaprasad, S. Puneeth, N. Manjunath
Advances in Mechanical Engineering and Material Sciences, 2025
This paper presents an investigation of the mechanical properties and structural analysis of composites fabricated using glass micro-balloons, crumb-rubber fillers and high-density polyethylene (HDPE). The focus of this study is to explore the synergistic effects of these components on the tensile behaviour of the resulting composite material. The composite samples were prepared by incorporating varying proportions of glass micro balloons and crumb rubber filler into the HDPE matrix. Tensile tests were conducted on the composite samples to evaluate their mechanical properties, containing stress-strain performance, yield strength, ultimate tensile strength, and extension at break. Additionally, finite element analysis (FEA) was performed to simulate and visualize the stress distribution and deformation patterns within the composite material. The results revealed that the addition of glass micro balloons enhanced the stiffness and strength of the composite, leading to improved mechanical properties. Furthermore, the incorporation of crumb rubber filler contributed to increased flexibility, impact resistance, and vibration damping capabilities of the composite. The experimental findings were gotten to be in good accord with the FEA results, validating the accuracy and reliability of the simulation.
Assessment and Electrodeposition of High-Quality Ni-based Thin Films: Enhancing High-Temperature Composites for Robotic Devices
R Vinay, B Vinod, Pasupulati Baburao, S Amosedinakaran, Sudhakiran Ponnuru
2025 8th International Conference on Circuit Power and Computing Technologies Iccpct 2025, 2025
Design and Simulate the BLDC motor for Performance Evaluation using ANSYS RMxprt
D D Padma Priya, R. Sreedhar, S. Amosedinakaran, T. Ilakkia, B Vinod, P. Baburao
International Conference on Electrical Energy Systems Icees, 2025
Tribological Characteristics of Cu-3%Ti Composite and Investigating the Coating Durability: Novel Approach of Electroless Nickel-Based Coatings
Vinod B, Pasupuleti Baburao, K. L. V. Nagasree, M.V. Someswararao, Vikram Babu, P.V.S.S.S. REDDY
2025 International Conference on Emerging Technologies in Engineering Applications Icetea 2025 Proceedings, 2025
Application of Walrus Optimization Technique for the Solution of Generation Scheduling in Regulated Environment
Sudhakiran Ponnuru, Baburao Pasupaleti, Amosedinakaran S, Vinod B, Aravinda K, M. Dhinakaran
2025 IEEE Madhya Pradesh Section Conference Mpcon 2025, 2025
Effect of Gamma Irradiation on Mechanical Properties of Banana Fiber Reinforced Natural Composite
B. Vinod, B. B. Ganesha, T. P. Jeevan, G. A. Manjunath, Mohan Y. Akshay, Vasan M. V. Vaishnavi
Advances in Mechanical Engineering and Material Sciences, 2025
An Innovative Method of Non-Dominated Sorting TLBO for Multi-Objective Short-Term Generation Scheduling of an Integrated Hydro-Thermal Wind Solar System
Sri Krishna Balaji Pradeepkumar Chilakala, Baburao Pasupulati, S Amosedinakaran, B Vinod, M. Dhinakaran, Sudhakiran Ponnuru
2025 International Conference on Recent Advances in Electrical Electronics Ubiquitous Communication and Computational Intelligence Raeeucci 2025, 2025
Preparation and Development of Polymer-Based Dielectric Composite: Influence of Agro-Waste Materials
R Siva Madhulatha, B Vinod, Baburao Pasupulati, S. Amosedinakaran, P. Rajakumar, Ponnuru Sudhakiran
3rd IEEE International Conference on Industrial Electronics Developments and Applications Icidea 2025, 2025
Investigation and performance of high niobium alloy: Noval approach of tribological behaviour and microstructural evolution
Vinod Barridu, Sushmi Mavuluru, Sri Krishna Balaji Pradeepkumar Chilakala, Babu Rao Pasupulati
Aip Conference Proceedings, 2024
Tribological and mechanical properties of FSW joints of untainted stainless steel and titanium: novel characterization of similar and dissimilar joints
Sai Sujith K, S Ravi, Vinod B
Surface Topography Metrology and Properties, 2024
Preparation and Characterization of Hybrid Composite Polyethylene fibers: Novel Catalyst in Treatment of Medical Waste
B. Vinod, S. Suresh, S. Sunil Kumar Reddy, D. Sudhakara
Journal of the Institution of Engineers India Series D, 2024
Enhancement of Dynamic and Tribological Characteristics of Epoxy Coating: Eco-friendly and Noval Biodegradable Fillers into Raw Materials
B. Vinod, F. Anand Raju, U. Elaiyarasan, S. Suresh
Journal of Bio and Tribo Corrosion, 2024
Assessment of self-compacting lightweight concrete: Preparation of eco-friendly fiber content on mechanical and durable characteristics
K. Chandrasekhar Reddy, Marri Rohini Kumar, B. Vinod
Iop Conference Series Earth and Environmental Science, 2024
TRIBOLOGICAL AND FATIGUE BEHAVIOUR OF Ti-Nb-Zr-Sn ALLOY THROUGH POWDER COMPACTING: NOVEL PERFORMANCE OF HIGH NIOBIUM ALLOYS FOR BONE TISSUE COMPATIBILITY
B. Vinod, S. Suresh, S. Sunil Kumar Reddy
Archives of Metallurgy and Materials, 2024
Synthesis and characterization of PET impregnated agro-medical waste: Novel approach for plastic substitute using hybrid composites
B. Vinod, S. Suresh, S. Sunil Kumar Reddy, K. Sai Sujith
Materials Today Proceedings, 2024
Hot deformation and fatigue behaviour of a zinc base doped biocompatible material: characterization of plasma spray coating on surface
Vinod B, Suresh Sonagiri, Sunil Kumar Reddy S
Surface Topography Metrology and Properties, 2023
Tribological and Mechanical Characteristics of Mg–Zn6.0–Y1.2–Zr0.2 alloy by SPS Technique: Natural and Agro-Waste Utilization
B. Vinod, S. Suresh, S. Sunil Kumar Reddy, K. Sai Sujith
Journal of Bio and Tribo Corrosion, 2023
Response surface methodology study on electrical discharge deposition of AZ31B magnesium alloy with powder composite electrode
U. Elaiyarasan, B. Vinod, K. Nallathambi
International Journal on Interactive Design and Manufacturing, 2023
Studies on Mechanical and Microstructural Properties of Aluminium Hybrid Composites: Influence of SiC/Gr Particles by Double Stir-Casting Approach
D. Jayaprakash, K. Niranjan, B. Vinod
Silicon, 2023
Synthesis of Alfa (Stipa tenacissima L.)/Hemp Fiber-Reinforced UHMWPE: Impact of Fibers on Mechanical, Microstructural and Aspect Properties
B. Vinod, S. Suresh, S. Sunil Kumar Reddy, D. Sudhakara, U. Uthirapathi Elaiyarasan
Journal of the Institution of Engineers India Series D, 2022
Energy Dissipation Behaviour of Bamboo Leaf Ash reinforced Aluminium Metal Matrix Composites
Stanley Ebenezer Nitla, B. Vinod, Ramakrishna Angajala, Puli Danaiah, Satya Jagadesh Hanumanthu
Journal of the Institution of Engineers India Series D, 2022
Investigation of Tribo-Mechanical Properties of Polyamide 6 Nano-Biocomposite: Novel Approach Prediction of Fiber Orientation with OMMT
S. Suresh, B. Vinod, S. Sunil Kumar Reddy, D. Sudhakara, A. Sandeep
Transactions of the Indian Institute of Metals, 2022
Tribological Behavior of Magnesium Hybrid Composite: Effect of Amorphous Silica-Solid Waste Reinforcement Particles to Reduce Material Cost
M. Anandajothi, B. Vinod
Silicon, 2022
Investigation on the material removal rate during CNC drilling of hybrid epoxy based novel composites
B. Vinod, D.Satish Kumar
Materials Today Proceedings, 2022
Investigation and performance of high niobium contain Ti-Al Alloys: Deformation behaviour and microstructural evolution
S. Suresh, B. Vinod, K. Sai Sujith, D. Sudhakara
Materials Today Proceedings, 2022
Investigation on Tribological Characteristics of Al 7075 MMNC: Behavior of Micro- and Nano-Sized Composites
Sonagiri Suresh, Baridu Vinod, Sangireddy Sunil Kumar Reddy, Uthirapathi Elaiyarasan
Proceedings of Engineering and Technology Innovation, 2022
Effect of Heat Treatment on the Corrosion Behaviour of Nickel Surface-Deposited Agro-Reinforced Metal Matrix Composites
Nitla Stanley Ebenezer, B. Vinod, Hanumanthu Satya Jagadesh
Journal of the Institution of Engineers India Series D, 2021
Hot Deformation Behavior of Titanium Alloy-Reinforced Solid/Agro Waste Materials: Constitutive Analysis and Processing Maps
B. Vinod, V. Ananthi, S. Ramanathan
Journal of Bio and Tribo Corrosion, 2021
Corrosion Behaviour of Bamboo Leaf Ash-Reinforced Nickel Surface-Deposited Aluminium Metal Matrix Composites
Nitla Stanley Ebenezer, B. Vinod, Hanumanthu Satya Jagadesh
Journal of Bio and Tribo Corrosion, 2021
Effect of Heat Treatment on the Damping Characteristics of Ni Surface-Deposited Agro Reinforced Metal Matrix Composites
Nitla Stanley Ebenezer, B. Vinod, Angajala Ramakrishna, Hanumanthu Satya Jagadesh
Transactions of the Indian Institute of Metals, 2021
Dry Sliding Wear Mechanisms of Incorporated Hydroxyapatite Waste Materials: Synthesis and Characterization of Magnesium Hybrid Composites
B. Vinod, M. Anandajothi
Transactions of the Indian Institute of Metals, 2020
Investigation on Tribological and Machining Characteristics of Al 7075/MWCNTs Nanocomposites
S. Suresh, D. Sudhakara, B. Vinod
Journal of Bio and Tribo Corrosion, 2020
Investigation on Industrial Waste Eco-Friendly Natural Fiber-Reinforced Polymer Composites
S. Suresh, D. Sudhakara, B. Vinod
Journal of Bio and Tribo Corrosion, 2020
Investigation of biodegradable hybrid composites: effect of fibers on tribo-mechanical characteristics
B. Vinod, S. Suresh, D. Sudhakara
Advanced Composites and Hybrid Materials, 2020
Investigation on mechanical, wear, and machining characteristics of Al 7075/MWCNTs using the liquid state method
S Suresh, D Sudhakara, B Vinod
Advanced Composites and Hybrid Materials, 2020
Experimental Study on Abrasive Flow Machining (AFM): New Approach for Investigation on Nano-SiC in the Improvement of Material Removal and Surface Finishing
D. Sudhakara, S. Suresh, B. Vinod
Journal of Bio and Tribo Corrosion, 2020
Hot workability of waste particles reinforced Al-7Si-0.3Mg alloy hybrid composites characterized using processing maps
B. Vinod, S. Ramanathan, M. Anandajothi
Materials Today Proceedings, 2020
Constitutive Equation and Processing Maps of Al-7Si-0.3 Mg Hybrid Composites: a Novel Approach to Reduce Cost of Material by Using Agro-Industrial Wastes
B. Vinod, S. Ramanathan, M. Anandajothi
Silicon, 2019
Investigation of Fatigue Strength and Life Prediction for Automotive Safety Components of V-Notched and Un-notched Specimen Part I: Utilization of Waste Materials into Raw Materials
S. Ramanathan, B. Vinod, M. Anandajothi
Transactions of the Indian Institute of Metals, 2019
Dry Sliding Wear Mechanism Maps of Al–7Si–0.3Mg Hybrid Composite: Novel Approach of Agro-Industrial Waste Particles to Reduce Cost of Material
S. Ramanathan, B. Vinod, P. Narayanasamy, M. Anandajothi
Journal of Bio and Tribo Corrosion, 2019
Fabrication and Characterization of Organic and In-Organic Reinforced A356 Aluminium Matrix Hybrid Composite by Improved Double-Stir Casting
B. Vinod, S. Ramanathan, V. Ananthi, N. Selvakumar
Silicon, 2019
Mechanical and tribological properties of abaca-roselle/cardanol formaldehyde hybrid composites
B Vinod, M Anandajothi
Materials Research Express, 2019
A novel approach for utilization of agro-industrial waste materials as reinforcement with Al–7Si–0.3Mg matrix hybrid composite on tribological behaviour
B. Vinod, S. Ramanathan, M. Anandajothi
SN Applied Sciences, 2019
Effect of organic and inorganic reinforced particulates for fatigue behaviour of Al–Si7–Mg0.3 hybrid composite: V-notched and un-notched specimen experiments with microstructural constituents
S. Ramanathan, B. Vinod, M. Anandajothi
SN Applied Sciences, 2019
Effect of Organic and Inorganic Reinforcement on Tribological Behaviour of Aluminium A356 Matrix Hybrid Composite
B. Vinod, S. Ramanathan, M. Anandajothi
Journal of Bio and Tribo Corrosion, 2018
Effect of Zener–Hollomon parameter on the flow behaviour and microstructure evolution of Al alloy with organic–inorganic hybrid composites
B. Vinod, S. Ramanathan
International Journal of Plastics Technology, 2018
Tribological characteristics of aluminium matrix reinforced with organic and inorganic particulates
S. Ramanathan, B. Vinod
Journal of Advanced Microscopy Research, 2018
Effect of zener-hollomon parameter on the flow behaviour and microstructure evolution of Al-7Si-0.3Mg alloy with organic and inorganic particles during hot deformation at different strain rates
B. Vinod, S. Ramanathan
Journal of Advanced Microscopy Research, 2018

RECENT SCHOLAR PUBLICATIONS

Hot Deformation Characteristics and Tool Wear Morphology of GH4169 Super Alloy: A Frugal Usage of Cryogenic Cooling During Turning Process
B Vinod, P Sudhakiran, SSK Reddy, B Pasupulati
Journal of The Institution of Engineers (India): Series D 107 (1), 415-427 , 2026
2026
Citations: 1
Univariate Forecasting of EV Power Consumption Using LSTM Networks: A Deep Learning Approach
T Puvirajan, S Amosedinakaran, PB Rao, A Bhuvanesh, SVJ Prakash, ...
2026 International Conference on Data Science, Agents and Artificial … , 2026
2026
Optimization and Assessment of CoCrFeMnTi High Entropy Alloy: Novel Strategy to Enhance Electrical and Mechanical Characteristics
S Ravindra, B Vinod, M Dison, P Baburao
2026 IEEE International Conference on Interdisciplinary Approaches in … , 2026
2026
Tribological and vitro biocompatibility of WE 43 alloy: impact of silica-doped with hydroxyapatite for orthopaedic applications
B Vinod, S Ponnuru, P Sivamurugan, R Ella, B Pasupuleti
Journal of the Australian Ceramic Society, 1-17 , 2026
2026
Citations: 2
Assessing the In Vitro Biocompatibility and Tribological Properties of WE 43 Alloy Using GelMA Hydrogel Coatings: Effect of Silica Doped with Hydroxyapatite
B Vinod, R Jarabala, S Ravindra, KA Devi, P Baburao
Journal of Materials Engineering and Performance, 1-18 , 2026
2026
Wear behaviour and coating performance of WC–Cu composite electrodes on ZE41A magnesium alloy using electrospark deposition
U Elaiyarasan, P Baranitharan, V Satheeshkumar, C Senthilkumar, ...
Canadian Metallurgical Quarterly 64 (4), 2114-2127 , 2025
2025
Citations: 11
Fabrication and Characterization of Ti-Al-Cr-Nb Alloy by Casting Technique: Microstructural Evolution and Implications for Surface Mechanisms
B Madhusudhana Reddy, S Sunil Kumar Reddy, B Vinod
Engineering Proceedings 93 (1), 27 , 2025
2025
Citations: 1
Design and Simulate the BLDC motor for Performance Evaluation using ANSYS RMxprt
DDP Priya, R Sreedhar, S Amosedinakaran, T Ilakkia, B Vinod, P Baburao
2025 11th International Conference on Electrical Energy Systems (ICEES), 76-80 , 2025
2025
Investigation of Electrical Characteristics and Hot Tensile Deformation Behaviour: Novel Assessment of Similar Joints by FSW technique
KS Sujith, S Ravi, B Vinod, B Pasupuleti
2025 8th International Conference on Circuit, Power & Computing Technologies … , 2025
2025
Assessment and Electrodeposition of High-Quality Ni-based Thin Films: Enhancing High-Temperature Composites for Robotic Devices
R Vinay, B Vinod, P Baburao, S Amosedinakaran, S Ponnuru
2025 8th International Conference on Circuit, Power & Computing Technologies … , 2025
2025
Assessment and Investigation of GH4169 Superalloy: A Frugal Innovative Attempt to Identify Dominant Lubricant Fluid under Dry and Wet Conditions
B Vinod, S Suresh, S Sunil Kumar Reddy, R Prakash
Journal of Materials Engineering and Performance 34 (13), 12833-12848 , 2025
2025
Citations: 1
Tribological Characteristics of Cu-3% Ti Composite and Investigating the Coating Durability: Novel Approach of Electroless Nickel-Based Coatings
B Vinod, P Baburao, KLV Nagasree, MV Someswararao, V Babu, ...
2025 International Conference on Emerging Technologies in Engineering … , 2025
2025
Extraction and Performance of Novel Lignocellulose from Agro-Wastes: Synergistic Integration of Waste into Ecofriendly Polymer Composites
B Vinod, BS Venkatesh Murthy, V Ramesh, P Venkataramana
Key Engineering Materials 1013, 41-56 , 2025
2025
Citations: 1
Preparation and Development of Polymer-Based Dielectric Composite: Influence of Agro-Waste Materials
RS Madhulatha, B Vinod, B Pasupulati, S Amosedinakaran, P Rajakumar, ...
2025 3rd IEEE International Conference on Industrial Electronics … , 2025
2025
CFD Analysis of Airflow Dynamics Over Formula Car Spoilers for Optimization of Downforce
B Vinod, BB Ganesha, N Raghu, V Chandan, GA Manjunatha
Proceedings of the 28th National and 6th International ISHMT-ASTFE Heat and … , 2025
2025
Microstructural Comparison of LM13-ZrO 2 Nanocomposites With and Without Cryogenic Treatment
N Raghu, V Chandan, B Vinod, K G B, NG Siddesh Kumar
Proceedings of the 28th National and 6th International ISHMT-ASTFE Heat and … , 2025
2025
Cryogenic Treatment of Biomedical Implant Alloys: Microstructural Refinement, Mechanical Property Enhancement, and Clinical Perspectives
V Chandan, N Raghu, B Vinod, S Ramya
Proceedings of the 28th National and 6th International ISHMT-ASTFE Heat and … , 2025
2025
An Innovative Method of Non-Dominated Sorting TLBO for Multi-Objective Short-Term Generation Scheduling of an Integrated Hydro-Thermal Wind Solar System
SKBP Chilakala, B Pasupulati, S Amosedinakaran, B Vinod, ...
IEEE Xplore , 2025
2025
Investigation and performance of high niobium alloy: Noval approach of tribological behaviour and microstructural evolution
V Barridu, S Mavuluru, SKBP Chilakala, BR Pasupulati
AIP Conference Proceedings 3192 (1), 020046 , 2024
2024
Citations: 2
Assessment of self-compacting lightweight concrete: preparation of eco-friendly fiber content on mechanical and durable characteristics
K Chandrasekhar Reddy, MR Kumar, B Vinod
IOP Conference Series: Earth and Environmental Science 1409 (1), 012020 , 2024
2024

MOST CITED SCHOLAR PUBLICATIONS

Fabrication and characterization of organic and in-organic reinforced A356 aluminium matrix hybrid composite by improved double-stir casting
B Vinod, S Ramanathan, V Ananthi, N Selvakumar
Silicon 11 (2), 817-829 , 2019
2019
Citations: 100
Investigation on industrial waste eco-friendly natural fiber-reinforced polymer composites
S Suresh, D Sudhakara, B Vinod
Journal of Bio-and Tribo-Corrosion 6 (2), 40 , 2020
2020
Citations: 58
Studies on mechanical and microstructural properties of aluminium hybrid composites: influence of SiC/Gr particles by double stir-casting approach
D Jayaprakash, K Niranjan, B Vinod
Silicon 15 (3), 1247-1261 , 2023
2023
Citations: 39
Effect of organic and inorganic reinforcement on tribological behaviour of aluminium A356 matrix hybrid composite
B Vinod, S Ramanathan, M Anandajothi
Journal of Bio-and Tribo-Corrosion 4 (3), 45 , 2018
2018
Citations: 37
A novel approach for utilization of agro-industrial waste materials as reinforcement with Al–7Si–0.3 Mg matrix hybrid composite on tribological behaviour
B Vinod, S Ramanathan, M Anandajothi
SN Applied Sciences 1 (1), 62 , 2019
2019
Citations: 32
Investigation of biodegradable hybrid composites: effect of fibers on tribo-mechanical characteristics
B Vinod, S Suresh, D Sudhakara
Advanced Composites and Hybrid Materials 3 (2), 194-204 , 2020
2020
Citations: 27
Investigation on mechanical, wear, and machining characteristics of Al 7075/MWCNTs using the liquid state method
S Suresh, D Sudhakara, B Vinod
Advanced Composites and Hybrid Materials 3 (2), 243-254 , 2020
2020
Citations: 26
Experimental study on abrasive flow machining (AFM): new approach for investigation on nano-SiC in the improvement of material removal and surface finishing
D Sudhakara, S Suresh, B Vinod
Journal of Bio-and Tribo-Corrosion 6 (1), 24 , 2020
2020
Citations: 24
Investigation of bio-waste natural fiber–reinforced polymer hybrid composite: effect on mechanical and tribological characteristics of biodegradable composites
S Suresh, D Sudhakara, B Vinod
Mechanics of Soft Materials 1 (1), 12 , 2019
2019
Citations: 23
Mechanical and tribological properties of abaca-roselle/cardanol formaldehyde hybrid composites
B Vinod, M Anandajothi
Materials Research Express 6 (12), 125363 , 2019
2019
Citations: 22
Dry sliding wear mechanism maps of Al–7Si–0.3 Mg hybrid composite: novel approach of agro-industrial waste particles to reduce cost of material
S Ramanathan, B Vinod, P Narayanasamy, M Anandajothi
Journal of Bio-and Tribo-Corrosion 5 (2), 32 , 2019
2019
Citations: 22
Response surface methodology study on electrical discharge deposition of AZ31B magnesium alloy with powder composite electrode
U Elaiyarasan, B Vinod, K Nallathambi
International Journal on Interactive Design and Manufacturing (IJIDeM) 17 (1 … , 2023
2023
Citations: 21
Corrosion behaviour of bamboo leaf ash-reinforced nickel surface-deposited aluminium metal matrix composites
NS Ebenezer, B Vinod, HS Jagadesh
Journal of Bio-and Tribo-Corrosion 7 (2), 72 , 2021
2021
Citations: 19
Effect of Zener–Hollomon parameter on the flow behaviour and microstructure evolution of Al alloy with organic–inorganic hybrid composites
B Vinod, S Ramanathan
International Journal of Plastics Technology 22 (1), 137-160 , 2018
2018
Citations: 19
Tribological behavior of magnesium hybrid composite: effect of amorphous silica-solid waste reinforcement particles to reduce material cost
M Anandajothi, B Vinod
Silicon 14 (1), 47-64 , 2022
2022
Citations: 16
Dry sliding wear mechanisms of incorporated hydroxyapatite waste materials: synthesis and characterization of magnesium hybrid composites
B Vinod, M Anandajothi
Transactions of the Indian Institute of Metals 73 (12), 3037-3057 , 2020
2020
Citations: 14
Characterization and preparation of eco-friendly foamed concrete using a foaming agent: Optimizing the design by Taguchi analysis
B Vinod
Journal of Building Engineering 88, 109068 , 2024
2024
Citations: 12
Wear behaviour and coating performance of WC–Cu composite electrodes on ZE41A magnesium alloy using electrospark deposition
U Elaiyarasan, P Baranitharan, V Satheeshkumar, C Senthilkumar, ...
Canadian Metallurgical Quarterly 64 (4), 2114-2127 , 2025
2025
Citations: 11
Investigation on tribological and machining characteristics of Al 7075/MWCNTs nanocomposites
S Suresh, D Sudhakara, B Vinod
Journal of Bio-and Tribo-Corrosion 6 (3), 97 , 2020
2020
Citations: 10
Tribological and mechanical characteristics of Mg–Zn6. 0–Y1. 2–Zr0. 2 alloy by SPS technique: natural and agro-waste utilization
B Vinod, S Suresh, SSK Reddy, KS Sujith
Journal of Bio-and Tribo-Corrosion 9 (1), 5 , 2023
2023
Citations: 9

B. VINOD

RESEARCH, TEACHING, or OTHER INTERESTS

Scopus Publications

RECENT SCHOLAR PUBLICATIONS

MOST CITED SCHOLAR PUBLICATIONS