benouis ali

@univ-saida.dz

faculty of technology
LMPM universy of sidi bel abbes, and university of saida

benouis ali


                  Download Compact PDF  
https://researchid.co/alymoh1980

RESEARCH, TEACHING, or OTHER INTERESTS

Mechanics of Materials, Biomaterials, Materials Science, Mechanical Engineering
11

Scopus Publications

203

Scholar Citations

8

Scholar h-index

5

Scholar i10-index

Scopus Publications

  • Comparative study by FEM of different liners of a transfemoral amputated lower limb
    Aichouba Adda Cherif, Moulgada Abdelmadjid, Zagane Mohammed El Sallah, Benouis Ali, Murat Yaylacı, Sahli Abderahmane, Mehmet Emin Özdemir, Ayberk Dizdar, Ecren Uzun Yaylacı, Yılmaz Güvercin
    Scientific Reports, 2025
    The mechanical behavior of prosthetic liners significantly influences stress distribution, soft tissue protection, and the overall efficiency of the prosthetic. While extensive research has been conducted on liner materials, the impact of liner thickness (2 mm, 4 mm, and 6 mm) on biomechanical response remains underexplored. This study utilizes finite element analysis in Abaqus to investigate how liner material (Gel vs. Silicone) and thickness affect contact pressure (CPRESS), maximum principal strain (Le. Max), shear stress (CSHEAR1), and vertical displacement (U3) at the residual limb-liner interface. A three-dimensional numerical model was developed to simulate stress transmission and displacement behavior under physiological loading conditions. The results demonstrate that liner thickness plays a critical role in modulating pressure distribution and mechanical stability, with Gel providing superior flexibility and shock absorption, whereas Silicone offers enhanced structural integrity. At a thickness of 2 mm, the highest pressure of 0.4656 MPa is recorded. When the thickness is increased to 4 mm, the pressure decreases to 0.4153 MPa, reflecting a reduction of approximately 10.8%. Further increasing the thickness to 6 mm results in a pressure drop of 0.3825 MPa, corresponding to a total reduction of 17.9%. These findings provide quantitative insights into stress attenuation mechanisms, contributing to the optimization of prosthetic liner design for improved clinical outcomes in lower-limb amputees.
  • Impact of overload on the fatigue behaviour of a plate with a central crack
    Structural Engineering and Mechanics, 2025
  • Finite element analysis of the crack emanating to cavity in the bone cement of the hip prosthesis
    Structural Engineering and Mechanics, 2024
  • Numerical modeling of the damaged cement orthopedic in three variants of total hip prostheses
    Structural Engineering and Mechanics, 2024
  • Effects of the stiffness of an inclusion on the mechanical behavior of an aluminum alloy plate with a lateral notch
    Steel and Composite Structures, 2024
  • Influence of hygrothermal aging on the mechanical strength of an Aluminum/Aluminum bonded assembly
    Advances in Materials Research South Korea, 2024
  • LINEAR AND NON-LINEAR ANALYSES OF PRESSURE PIPE ELBOWS
    Benouis Ali, Zahi Rachid, Moulgada Abdelmadjid, Djebbar Noureddine
    Journal of the Serbian Society for Computational Mechanics, 2023
    The introduction of pressure piping increasingly requires the use of efficient materials which must withstand both high hydrostatic pressures, high mechanical loads and high thermal gradients. At nuclear power plants, piping systems are subjected to high pressures (up to 60 MPa). The occurrence of cracks and their possible spread is one of the serious risks in the industry. For this reason, elbows are considered critical components of a piping system. Therefore, in order to design and/or qualify a pipe structurally, it is useful to have a reliable evaluation of their structural behavior under different combined loads. The objective of this study is to determine analytical functions for the evaluation of the J integral as a function of crack size, elbow size, and the nature and intensity of loading. This assessment is derived from the numerical results obtained by the WARP3D calculation code exploiting the finite element method (FEM).
  • Study of the fracture behavior of different structures by the extended finite element method (X-FEM)
    Advances in Materials Research South Korea, 2023
  • THREE-DIMENSIONAL STUDY OF BEHAVIOR DAMAGE IN THE ORTHOPEDIC CEMENT, INTERACTION-SIZE EFFECT ON THE POROSITY
    Revista Romana De Materiale Romanian Journal of Materials, 2023
  • Numerical simulation of the femur fracture with and without prosthesis under static loading using Extended Finite Element Method (X-FEM)
    Journal of Mechanical Engineering, 2017
  • Numerical analysis of crack propagation in cement PMMA: Application of SED approach
    Benouis Ali, Boulenouar Abdelkader, Benseddiq Noureddine, Serier Boualem
    Structural Engineering and Mechanics, 2015

RECENT SCHOLAR PUBLICATIONS

  • Effect of crack defects on stress intensity and longevity of hip prostheses: a finite element analysis
    B Ali, Z El Sallah, M Abdelmadjid, M Yaylaci, A Djafar, Ş Öztürk, ...
    Structural Engineering and Mechanics 97 (5) , 2026
    2026
  • Impact of overload on the fatigue behaviour of a plate with a central crack
    M Abdelmadjid, ZM El Sallah, B Ali, T Hiba, B Daouia
    Structural Engineering and Mechanics, An Int'l Journal 95 (5), 371-379 , 2025
    2025
  • Comparative study by FEM of different liners of a transfemoral amputated lower limb
    AA Cherif, M Abdelmadjid, ZM El Sallah, B Ali, M Yaylacı, S Abderahmane, ...
    Scientific Reports 15 (1), 31878 , 2025
    2025
    Citations: 5
  • Novel Geometric Shape to Enhance Bending Resistance in Sandwich Panels: Core Optimization
    H Achache, R Zahi, BB Bouiadjra, D Ait Kaci, A Benouis
    Acta Mechanica Slovaca 29 (2) , 2025
    2025
  • Behavior of structures repaired by hybrid composite patches during the aging of the adhesive
    H Achache, R Zahi, D Ait Kaci, A Benouis
    Structural Engineering and Mechanics, An Int'l Journal 91 (2), 135-147 , 2024
    2024
    Citations: 3
  • Effects of the stiffness of an inclusion on the mechanical behavior of an aluminum alloy plate with a lateral notch
    M Abdelmadjid, ZM El Sallah, M Yaylaci, AK Djafar, B Ali, B Abdelghani, ...
    Steel and Composite Structures 51 (1), 063 , 2024
    2024
    Citations: 8
  • Finite element analysis of the crack emanating to cavity in the bone cement of the hip prosthesis
    B Ali, ZM El Sallah, M Abdelmadjid, AK Djafar, Z Rachid, C Mohamed
    Structural engineering and mechanics: An international journal 92 (3), 297-306 , 2024
    2024
  • Reinforcement of HDPE pipe by composite laminate under internal water pressure
    H Achache, R Zahi, D Ait Kaci, A Benouis, M Chaib, A Slimane
    Structural engineering and mechanics: An international journal 92 (5), 453-462 , 2024
    2024
  • Influence of hygrothermal aging on the mechanical strength of an Aluminum/Aluminum bonded assembly
    ZM El Sallah, M Abdelmadjid, B Ali, M Kouider, Z Rachid
    Advances in materials research: AMR 13 (6), 527-546 , 2024
    2024
  • Numerical modeling of the damaged cement orthopedic in three variants of total hip prostheses
    C Mohamed, ZM El Sallah, M Abdelmadjid, AK Djafar, B Ali, Z Rachid, ...
    Structural engineering and mechanics: An international journal 91 (3), 251-262 , 2024
    2024
  • Finite element analysis of the behavior of elliptical cracks emanating from the orthopedic cement interface in total hip prostheses
    A Benouis, MES Zagane, A Moulgada, M Yaylaci, D Ait Kaci, M Terzi, ...
    Structural engineering and mechanics: An international journal 89 (5), 539-547 , 2024
    2024
    Citations: 19
  • THREE-DIMENSIONAL STUDY OF BEHAVIOR DAMAGE IN THE ORTHOPEDIC CEMENT, INTERACTION-SIZE EFFECT ON THE POROSITY
    B Ali, Z Rachid, M Abdelmadjidé, ŽM el Sallah, M Bentahar, B Benali
    Revista Romana de Materiale 53 (4), 280-287 , 2023
    2023
  • Study of the fracture behavior of different structures by the extended finite element method (X-FEM)
    ZM El Sallah, M Abdelmadjid, S Abderahmane, B Abdelghani, B Ali
    Advances in materials research: AMR 12 (4), 273-286 , 2023
    2023
    Citations: 2
  • LINEAR AND NON-LINEAR ANALYSES OF PRESSURE PIPE ELBOWS
    B Ali, Z Rachid, M Abdelmadjid, D Noureddine
    Journal of the Serbian Society for Computational Mechanics/Vol 17 (1), 71-87 , 2023
    2023
  • On the effect of steel columns cross sectional properties on the behaviours when subjected to blast loading
    MA Hadianfard, A Farahani, B Ali
    Structural Engineering and Mechanics, 449-463 , 2022
    2022
    Citations: 41
  • Biomechanical behaviour of the total hip prosthesis subjected to normal gait cycle load: Identification of the damage in the cement mantle
    MES Zagane, A Benouis, A Moulgada, N Djebbar, A Sahli
    Journal of the Serbian Society for Computational Mechanics/Vol 14 (2), 14-30 , 2020
    2020
    Citations: 4
  • Effect of force during stumbling of the femur fracture with a different ce-mented total hip prosthesis
    ZM El Sallah, B Ali, S Abderahmen
    Biomater. Biomec. Bioeng 5 (1), 11-23 , 2020
    2020
    Citations: 6
  • Effect of the combined efforts on stresses distribution in the dental prosthesis
    B Mohammed Elnedhir, N Djebbar, A Benouis, B Boutabout
    Materials & biomaterials science 2 (1), 018-023 , 2019
    2019
  • 3D FE analysis of the behavior of elliptical cracks on orthopedic cement of the total hip prosthesis
    A Benouis, MES Zagane, A Boulenouar, B Serier, ME Belgherras
    Journal of theoretical and applied mechanics 56 (3), 803-813 , 2018
    2018
    Citations: 8
  • Modelling of the femoral fracture under dynamic loading
    A Moulgada, ME Zagane, A Benouis, A Sahli, M Cherfi, S Benbarek
    Journal of the Serbian Society for Computational Mechanics 12 (1), 96-107 , 2018
    2018
    Citations: 5

MOST CITED SCHOLAR PUBLICATIONS

  • On the effect of steel columns cross sectional properties on the behaviours when subjected to blast loading
    MA Hadianfard, A Farahani, B Ali
    Structural Engineering and Mechanics, 449-463 , 2022
    2022
    Citations: 41
  • Numerical analysis of crack propagation in cement PMMA: application of SED approach
    B Ali, B Abdelkader, B Noureddine, S Boualem
    Structural Engineering and Mechanics 55 (1), 93-109 , 2015
    2015
    Citations: 27
  • Numerical modelling of crack propagation in cement PMMA: Comparison of different criteria
    A Boulenouar, A Benouis, N Benseddiq
    Materials Research 19 (4), 846-855 , 2016
    2016
    Citations: 22
  • Finite element analysis of the behavior of elliptical cracks emanating from the orthopedic cement interface in total hip prostheses
    A Benouis, MES Zagane, A Moulgada, M Yaylaci, D Ait Kaci, M Terzi, ...
    Structural engineering and mechanics: An international journal 89 (5), 539-547 , 2024
    2024
    Citations: 19
  • Impact of future climate change on UK building performance
    J Amoako-Attah, B Ali
    Advances in environmental research 2 (3), 203 , 2013
    2013
    Citations: 13
  • Finite element analysis of the behaviour of a crack in the orthopedic cement
    A Benouis, A Boulenouar, B Serier
    Journal of Theoretical and Applied Mechanics 54 (1), 277-284 , 2016
    2016
    Citations: 9
  • Effects of the stiffness of an inclusion on the mechanical behavior of an aluminum alloy plate with a lateral notch
    M Abdelmadjid, ZM El Sallah, M Yaylaci, AK Djafar, B Ali, B Abdelghani, ...
    Steel and Composite Structures 51 (1), 063 , 2024
    2024
    Citations: 8
  • 3D FE analysis of the behavior of elliptical cracks on orthopedic cement of the total hip prosthesis
    A Benouis, MES Zagane, A Boulenouar, B Serier, ME Belgherras
    Journal of theoretical and applied mechanics 56 (3), 803-813 , 2018
    2018
    Citations: 8
  • Evaluation of the influence of creep and shrinkage determinants on column shortening in mid-rise buildings
    B Ali, A Rotimi, S Tovi, C Goodchild, J Rizzuto
    Advances in concrete construction 5 (2), 155 , 2017
    2017
    Citations: 8
  • Effect of force during stumbling of the femur fracture with a different ce-mented total hip prosthesis
    ZM El Sallah, B Ali, S Abderahmen
    Biomater. Biomec. Bioeng 5 (1), 11-23 , 2020
    2020
    Citations: 6
  • Comparative study by FEM of different liners of a transfemoral amputated lower limb
    AA Cherif, M Abdelmadjid, ZM El Sallah, B Ali, M Yaylacı, S Abderahmane, ...
    Scientific Reports 15 (1), 31878 , 2025
    2025
    Citations: 5
  • Modelling of the femoral fracture under dynamic loading
    A Moulgada, ME Zagane, A Benouis, A Sahli, M Cherfi, S Benbarek
    Journal of the Serbian Society for Computational Mechanics 12 (1), 96-107 , 2018
    2018
    Citations: 5
  • Deformation of multi-storey flat slabs, a site investigation
    S Tovi, C Goodchild, B Ali
    Advances in concrete construction 5 (1), 049 , 2017
    2017
    Citations: 5
  • Numerical simulation of the femur fracture with and without prosthesis under static loading using extended finite element method (X-FEM)
    ZM El Sallah, B Ali, S Abderahmen, B Serier
    Journal of Mechanical Engineering 14 (1), 97-112 , 2017
    2017
    Citations: 5
  • Biomechanical behaviour of the total hip prosthesis subjected to normal gait cycle load: Identification of the damage in the cement mantle
    MES Zagane, A Benouis, A Moulgada, N Djebbar, A Sahli
    Journal of the Serbian Society for Computational Mechanics/Vol 14 (2), 14-30 , 2020
    2020
    Citations: 4
  • Numerical simulation of the femur fracture with and without prosthesis under static loading using extended finite element method (X-FEM)
    Z Mohammed El Sallah, B Ismail, B Ali, S Abderahmen, BB Bel Abbes, ...
    Journal of Mechanical Engineering (JMechE) 14 (1), 109-124 , 2017
    2017
    Citations: 4
  • Influence of porosity on the behavior of cement orthopaedic of total hip prosthesis
    B Smail, B Ali, S Boualem
    Advances in Biomechanics & Applications 2 (1), 1 , 2015
    2015
    Citations: 4
  • Behavior of structures repaired by hybrid composite patches during the aging of the adhesive
    H Achache, R Zahi, D Ait Kaci, A Benouis
    Structural Engineering and Mechanics, An Int'l Journal 91 (2), 135-147 , 2024
    2024
    Citations: 3
  • Study of the fracture behavior of different structures by the extended finite element method (X-FEM)
    ZM El Sallah, M Abdelmadjid, S Abderahmane, B Abdelghani, B Ali
    Advances in materials research: AMR 12 (4), 273-286 , 2023
    2023
    Citations: 2
  • Evaluation of thermal comfort and cooling loads for a multistory building
    A Lykartsis, B Ali, A Mylona
    Advances in energy research 5 (1), 65 , 2017
    2017
    Citations: 2