Shilpi Shriwastava

@nitttrbpl.ac.in

Assistant Professor, Department of Electrical and Electronics Engineering
National Institute of Technical Teachers’ Training and Research (NITTTR), Bhopal

Shilpi Shriwastava


               Download Compact PDF  
https://researchid.co/shilpi1

RESEARCH, TEACHING, or OTHER INTERESTS

Electrical and Electronic Engineering, Materials Science
13

Scopus Publications

468

Scholar Citations

8

Scholar h-index

8

Scholar i10-index

Scopus Publications

  • Investigation of voltage-dependent luminance of flexible FLG, rGO/PEDOT: PSS TCEs based organic light emitting diode
    Sandeep Sharma, Karamvir Singh, Bhoop Singh, Shilpi Shriwastava, Yashashchandra Dwivedi, C. C. Tripathi
    Journal of Optics India, 2025
  • Significance of nano-materials, designs consideration and fabrication techniques on performances of strain sensors - A review
    Karamvir Singh, Sandeep Sharma, Shilpi Shriwastava, Parveen Singla, Monish Gupta, C.C. Tripathi
    Materials Science in Semiconductor Processing, 2021
  • A laser patterned zero bias Au/Al2O3/Mo metal-insulator-metal diode rectifier for RF detection
    Shilpi Shriwastava, Dhairya Singh Arya, Sandeep Sharma, Karamvir Singh, Pushpapraj Singh, C.C. Tripathi
    Solid State Electronics, 2020
  • Impact of Triple Roll Milling Processing Parameters on Fluidic/Rheological and Electrical Properties of Aqueous Graphene Ink
    Sandeep Kumar, Pramod Kumar, Kapil Bhatt, Shilpi Shrivastva, Amit Kumar, Ravinder Singh, Rajesh Punia, Chandra Charu Tripathi
    Advanced Engineering Materials, 2020
    Graphene ink is a potential candidate for the printing of electronic devices. Rheological studies of graphene inks are necessary to estimate and tune the behavior of ink during and after printing. Ink constituents and their fundamental properties play an important role in modifying the rheological behavior of ink. During the processing of ink, modification of these properties takes place. So, it is quite important to investigate the role of processing equipment on the ink constituents and correspondingly on the rheological behavior of ink and printed functional devices. Herein, graphene ink formulation through a triple roll mill (TRM) is presented. The particle size of graphene ink reduces substantially with both the speed of rollers and number of passes. Approximately 52% reduction in particle size is observed after five passes at the highest roller speed, and it further reduces up to 72% with an increase in the number of passes. Correspondingly, solvent loss, density, and viscosity of the inks are observed in respect of roller speed and number of passes. The impact of TRM parameters on ink constituents, rheology, and electrical properties of screen‐printed resistors is discussed and explained in terms of simple analytical models.
  • Metal–Insulator–Metal Diodes: A Potential High Frequency Rectifier for Rectenna Application
    Shilpi Shriwastava, C. C. Tripathi
    Journal of Electronic Materials, 2019
  • Alternative transparent conducting electrode materials for flexible optoelectronic devices
    S. Sharma, S. Shriwastava, S. Kumar, K. Bhatt, C. Charu Tripathi
    Opto Electronics Review, 2018
    Transparent Conductive Electrode (TCE) is an essential part of the optoelectronic and display devices such as Liquid Crystal Displays (LCDs), Solar Cells, Light Emitting Diodes (LEDs), Organic Light Emitting Diodes (OLEDs) and touch screens. Indium Tin Oxide (ITO) is a commonly used TCE in these devices because of its high transparency and low sheet resistance. However, scarcity of indium and brittle nature of ITO limit its use in future flexible electronics. In order to develop flexible optoelectronic devices with improved performance, there is a requirement of replacing the ITO with a better alternate TCE. In this work, several alternative TCEs including transparent conductive oxides, carbon nanotubes, conducting polymers, metal nanowires, graphene and composites of these materials are studied with their properties such as sheet resistance, transparency and flexibility. The advantage and current challenges of these materials are also presented in this work.
  • A comparative study of graphene and graphite-based field effect transistor on flexible substrate
    Kapil Bhatt, Cheenu Rani, Monika Vaid, Ankit Kapoor, Pramod Kumar, Sandeep Kumar, Shilpi Shriwastawa, Sandeep Sharma, Randhir Singh, C C Tripathi
    Pramana Journal of Physics, 2018
  • A facile approach to fabricate graphene based piezoresistive strain sensor on paper substrate
    Indian Journal of Pure and Applied Physics, 2018
  • Investigating PMMA as a potential insulator material for Metal-Insulator-Metal diode
    Shilpi Shriwastava, Kapil Bhatt, Sandeep Sharma, Sandeep Kumar, C.C. Tripathi
    International Journal of Nanoparticles, 2018
    The metal-insulator-metal (MIM) diodes are considered very promising for high frequency applications because of its tunnelling-based ultrafast charge transport mechanism. A wide variety of materials are being explored in quest of developing these thin film devices. Recently, organic insulator-based MIM diodes have attracted significant attention to the researchers due to its several advantages and have become a promising alternative of conventional inorganic insulators. In the present work the feasibility of an organic polymer polymethyl methacrylate (PMMA) is investigated for insulating material of MIM junction. It is a transparent resin which is able to produce uniform and thin insulating layer with low defect density. In this work, an Al/PMMA/Cr structure is fabricated by optimising different process parameters in order to develop high performance, reproducible organic MIM diodes. The as fabricated device exhibited fairly asymmetric and nonlinear current-voltage characteristics, which reveals the viability of PMMA as candidate material for insulator layer in MIM diodes.
  • A study on design aspects of MIM diodes for high frequency applications
    Shilpi, Kapil Bhatt, Sandeep Kumar, Sandeep, C.C. Tripathi
    2017 2nd International Conference for Convergence in Technology I2ct 2017, 2017
    Structurally, an MIM diode is a very thin layer of insulator sandwiched between two metal electrodes. Owing to the tunneling based conduction mechanism it facilitates ultra-fast switching speed, desirable for many of the high frequency applications. However, due to thin insulator design considerations and underneath conduction mechanism, they normally do not exhibit diode like behavior. Therefore, the successful implementation of the diode in these applications demands highly non-linear and asymmetric current-voltage characteristics. This necessitates the consideration of design aspects of diode prior to its actual fabrication. In this paper the various design aspects of MIM diode is studied and their influence on the diode's figures of merit is investigated.
  • Fabrication and characterization of Al/PMMA/Cr metal-insulator-metal diode
    Shilpi, Kapil Bhatt, Sandeep Kumar, Sandeep, C.C. Tripathi
    Proceedings of 2nd International Conference on 2017 Devices for Integrated Circuit Devic 2017, 2017
  • Potential challenges and issues in implementation of MIM diodes for rectenna application
    Shilpi, Kapil Bhatt, Sandeep, Sandeep Kumar, C.C. Tripathi
    Proceedings of the International Conference on Inventive Communication and Computational Technologies Icicct 2017, 2017
  • Comparative study of the models used for calculation of transport characteristics in metal-insulator-metal/MIIM diodes
    Kapil Bhatt, . Shilpi, C. C. Tripathi
    Advanced Science Letters, 2015

RECENT SCHOLAR PUBLICATIONS

  • Investigation of voltage-dependent luminance of flexible FLG, rGO/PEDOT: PSS TCEs based organic light emitting diode
    S Sharma, K Singh, B Singh, S Shriwastava, Y Dwivedi, CC Tripathi
    Journal of Optics 54 (4), 2309-2313 , 2025
    2025
    Citations: 1
  • Significance of nano-materials, designs consideration and fabrication techniques on performances of strain sensors-A review
    K Singh, S Sharma, S Shriwastava, P Singla, M Gupta, CC Tripathi
    Materials Science in Semiconductor Processing 123, 105581 , 2021
    2021
    Citations: 76
  • A laser patterned zero bias Au/Al2O3/Mo metal-insulator-metal diode rectifier for RF detection
    S Shriwastava, DS Arya, S Sharma, K Singh, P Singh, CC Tripathi
    Solid-State Electronics 171, 107870 , 2020
    2020
    Citations: 2
  • Impact of triple roll milling processing parameters on fluidic/rheological and electrical properties of aqueous graphene ink
    S Kumar, P Kumar, K Bhatt, S Shrivastva, A Kumar, R Singh, R Punia, ...
    Advanced Engineering Materials 22 (4), 1901187 , 2020
    2020
    Citations: 15
  • Metal–Insulator–Metal Diodes: A Potential High Frequency Rectifier for Rectenna Application
    S Shriwastava, CC Tripathi
    Journal of Electronic Materials 48 (5), 2635-2652 , 2019
    2019
    Citations: 44
  • Alternative transparent conducting electrode materials for flexible optoelectronic devices
    S Sharma, S Shriwastava, S Kumar, K Bhatt, CC Tripathi
    Opto-Electronics Review 26 (3), 223-235 , 2018
    2018
    Citations: 165
  • A facile approach to fabricate graphene based piezoresistive strain sensor on paper substrate
    CCT Monika, Kapil Bhatt, Cheenu Rani, Ankit Kapoor, Pramod Kumar, Shilpi ...
    Indian Journal of Pure & Applied Physics (IJPAP) 56 (5), 361-366 , 2018
    2018
    Citations: 11
  • A comparative study of graphene and graphite-based field effect transistor on flexible substrate
    K Bhatt, C Rani, M Vaid, A Kapoor, P Kumar, S Kumar, S Shriwastawa, ...
    Pramana 90 (6), 75 , 2018
    2018
    Citations: 20
  • Flexible devices in the horizon of graphene
    PK C. C. Tripathi, Sandeep Kumar, Sandeep Sharma, Randhir Singh, Shilpi ...
    Emerging Trends In Applied Materials Science And Surface Engineering held at … , 2018
    2018
  • Reaching the Unreached Through Science and Technology
    Shilpi, CC Tripathi
    11th Science Communicators’ Meet in Indian Science Congress – 2018, Manipur … , 2018
    2018
  • Fabrication and Characterization of Al/AlOx/Ni Metal Insulator Metal diode
    Shilpi, CC Tripathi
    105th Indian Science Congress, Manipur , 2018
    2018
  • Investigating PMMA as a potential insulator material for metal-insulator-metal diode
    S Shriwastava, K Bhatt, S Sharma, S Kumar, CC Tripathi
    International Journal of Nanoparticles 10 (3), 207-216 , 2018
    2018
    Citations: 1
  • A study on design aspects of MIM diodes for high frequency applications
    Shilpi, CC Tripathi
    2017 2nd International Conference for Convergence in Technology (I2CT), 738-741 , 2017
    2017
    Citations: 3
  • Fabrication and characterization of Al/PMMA/Cr metal-insulator-metal diode
    Shilpi, CC Tripathi
    2017 Devices for Integrated Circuit (DevIC), 17-19 , 2017
    2017
    Citations: 2
  • Terahertz Detectors (THzDs): Bridging the Gap for Energy Harvesting
    CCT Kapil Bhatt, Shilpi Shriwastava, Sandeep Kumar, Sandeep
    Terahertz Spectroscopy: A Cutting Edge Technology, 83-100 , 2017
    2017
    Citations: 110
  • Potential challenges and issues in implementation of MIM diodes for rectenna application
    Shilpi, CC Tripathi
    2017 International Conference on Inventive Communication and Computational … , 2017
    2017
    Citations: 16
  • Fabrication and Characterization of Ni/NiO/Al Metal-Insulator-Metal Tunnel Junction
    Shilpi, K Bhatt, Sandeep, S Kumar, CC Tripathi
    6th International symposium on Integrated Functionalities (ISIF-2017), at … , 2017
    2017
  • A study on role of compression speed in LB based graphene film formation using ethanol spreading solvent
    CCT Shilpi, Kapil Bhatt, Sandeep, Sandeep Kumar
    International Conference on Nanomaterials and Nanotechnology, 01-03 March … , 2017
    2017
  • Synthesis of Graphene Ink for Flexible Electronic Applications Using Vibroshaker
    SC Sandeep Kumar, Sandeep, Shilpi, Randhir Bhoria, C. C. Tripathi, Dinesh ...
    International Conference on Material Science & Technology, 01st-04th March … , 2016
    2016
  • Novel Organic Light Emitting Diode Materials, Their Fabrication and Characterization for High Performance Applications
    CCT Sandeep, Sandeep Kumar, Shilpi, Randhir Bhoria
    International Conference on Material Science & Technology, 01st-04th March … , 2016
    2016

MOST CITED SCHOLAR PUBLICATIONS

  • Alternative transparent conducting electrode materials for flexible optoelectronic devices
    S Sharma, S Shriwastava, S Kumar, K Bhatt, CC Tripathi
    Opto-Electronics Review 26 (3), 223-235 , 2018
    2018
    Citations: 165
  • Terahertz Detectors (THzDs): Bridging the Gap for Energy Harvesting
    CCT Kapil Bhatt, Shilpi Shriwastava, Sandeep Kumar, Sandeep
    Terahertz Spectroscopy: A Cutting Edge Technology, 83-100 , 2017
    2017
    Citations: 110
  • Significance of nano-materials, designs consideration and fabrication techniques on performances of strain sensors-A review
    K Singh, S Sharma, S Shriwastava, P Singla, M Gupta, CC Tripathi
    Materials Science in Semiconductor Processing 123, 105581 , 2021
    2021
    Citations: 76
  • Metal–Insulator–Metal Diodes: A Potential High Frequency Rectifier for Rectenna Application
    S Shriwastava, CC Tripathi
    Journal of Electronic Materials 48 (5), 2635-2652 , 2019
    2019
    Citations: 44
  • A comparative study of graphene and graphite-based field effect transistor on flexible substrate
    K Bhatt, C Rani, M Vaid, A Kapoor, P Kumar, S Kumar, S Shriwastawa, ...
    Pramana 90 (6), 75 , 2018
    2018
    Citations: 20
  • Potential challenges and issues in implementation of MIM diodes for rectenna application
    Shilpi, CC Tripathi
    2017 International Conference on Inventive Communication and Computational … , 2017
    2017
    Citations: 16
  • Impact of triple roll milling processing parameters on fluidic/rheological and electrical properties of aqueous graphene ink
    S Kumar, P Kumar, K Bhatt, S Shrivastva, A Kumar, R Singh, R Punia, ...
    Advanced Engineering Materials 22 (4), 1901187 , 2020
    2020
    Citations: 15
  • A facile approach to fabricate graphene based piezoresistive strain sensor on paper substrate
    CCT Monika, Kapil Bhatt, Cheenu Rani, Ankit Kapoor, Pramod Kumar, Shilpi ...
    Indian Journal of Pure & Applied Physics (IJPAP) 56 (5), 361-366 , 2018
    2018
    Citations: 11
  • A study on design aspects of MIM diodes for high frequency applications
    Shilpi, CC Tripathi
    2017 2nd International Conference for Convergence in Technology (I2CT), 738-741 , 2017
    2017
    Citations: 3
  • A laser patterned zero bias Au/Al2O3/Mo metal-insulator-metal diode rectifier for RF detection
    S Shriwastava, DS Arya, S Sharma, K Singh, P Singh, CC Tripathi
    Solid-State Electronics 171, 107870 , 2020
    2020
    Citations: 2
  • Fabrication and characterization of Al/PMMA/Cr metal-insulator-metal diode
    Shilpi, CC Tripathi
    2017 Devices for Integrated Circuit (DevIC), 17-19 , 2017
    2017
    Citations: 2
  • Comparative Study of the Models Used for Calculation of Transport Characteristics in Metal-Insulator-Metal/MIIM Diodes
    K Bhatt, Shilpi, CC Tripathi
    Advanced Science Letters 21 (8), 2570-2573 , 2015
    2015
    Citations: 2
  • Investigation of voltage-dependent luminance of flexible FLG, rGO/PEDOT: PSS TCEs based organic light emitting diode
    S Sharma, K Singh, B Singh, S Shriwastava, Y Dwivedi, CC Tripathi
    Journal of Optics 54 (4), 2309-2313 , 2025
    2025
    Citations: 1
  • Investigating PMMA as a potential insulator material for metal-insulator-metal diode
    S Shriwastava, K Bhatt, S Sharma, S Kumar, CC Tripathi
    International Journal of Nanoparticles 10 (3), 207-216 , 2018
    2018
    Citations: 1
  • Flexible devices in the horizon of graphene
    PK C. C. Tripathi, Sandeep Kumar, Sandeep Sharma, Randhir Singh, Shilpi ...
    Emerging Trends In Applied Materials Science And Surface Engineering held at … , 2018
    2018
  • Reaching the Unreached Through Science and Technology
    Shilpi, CC Tripathi
    11th Science Communicators’ Meet in Indian Science Congress – 2018, Manipur … , 2018
    2018
  • Fabrication and Characterization of Al/AlOx/Ni Metal Insulator Metal diode
    Shilpi, CC Tripathi
    105th Indian Science Congress, Manipur , 2018
    2018
  • Fabrication and Characterization of Ni/NiO/Al Metal-Insulator-Metal Tunnel Junction
    Shilpi, K Bhatt, Sandeep, S Kumar, CC Tripathi
    6th International symposium on Integrated Functionalities (ISIF-2017), at … , 2017
    2017
  • A study on role of compression speed in LB based graphene film formation using ethanol spreading solvent
    CCT Shilpi, Kapil Bhatt, Sandeep, Sandeep Kumar
    International Conference on Nanomaterials and Nanotechnology, 01-03 March … , 2017
    2017
  • Synthesis of Graphene Ink for Flexible Electronic Applications Using Vibroshaker
    SC Sandeep Kumar, Sandeep, Shilpi, Randhir Bhoria, C. C. Tripathi, Dinesh ...
    International Conference on Material Science & Technology, 01st-04th March … , 2016
    2016