Dr. L V Awadhani

@pccoepune.com

Associate Professor, Mechanical Eneeringng
Pimpri Chinchwad College of Engineering

Dr. L V Awadhani


                     Download Compact PDF  
https://researchid.co/lvapccoe

EDUCATION

B E Mechanical, M Tech Design Engineering, Ph.D Mechanical Engineering

RESEARCH, TEACHING, or OTHER INTERESTS

Mechanical Engineering, Mechanics of Materials, General Engineering
8

Scopus Publications

56

Scholar Citations

5

Scholar h-index

1

Scholar i10-index

Scopus Publications

  • Static structural analysis of engine hood using natural hybrid fiber composite
    Krishan Pandey, L. V. Awadhani, Ankita Avthankar, P. R. Sonawane, N. S. Navagale
    Aip Conference Proceedings, 2026
  • Behavior of Composite Bolted Joint Under Tension-Shear and Compression-Shear Load Cases
    Lakshmana Vasantrao Awadhani, Anand Krishna Bewoor
    International Review of Mechanical Engineering, 2023
    Composite materials are widely used to derive benefits such as improved performance of gadgets and machines by reducing weight. While connecting composite parts, bolted connections are preferred. This paper discusses the performance analysis of composite bolted connections based on peak load and stiffness for the two load cases, tension-shear and compression-shear loading. Experimental research on the behavior of the joint has led to the development of regression equations that can forecast the peak load and stiffness of the connection. The predicted and experimental responses have a reasonable correlation. The regression models were validated using additional experiments. Desirability function analysis was done to identify the optimum parameter settings to enhance the responses to the applied loadings. The results of the desirability function analysis were verified through the Taguchi analysis of S/N ratios.
  • Design and development of agricultural spraying system
    Dnyanesh V Honrao, Laxman V Awadhani
    Materials Today Proceedings, 2023
  • Investigative studies on the mechanical behavior of Jute, Sisal, Hemp, and glass fiber-based composite material
    Jayashri Wagh, Mahadev Madgule, L.V. Awadhani
    Materials Today Proceedings, 2023
  • Behavior of single lap composite bolted joint under traction loading: Experimental investigation
    L. V. Awadhani, Anand Bewoor
    Aip Conference Proceedings, 2018
    Composite bolted joints are preferred connection in the composite structures to facilitate the dismantling for the replacements/ maintenance work. The joint behavior under tractive forces has been studied in order to understand the safety of the structure designed. The main objective of this paper is to investigate the behavior of single-lap joints in carbon fiber reinforced epoxy composites under traction loading conditions. The experiments were designed to identify the effect of bolt diameter, stacking sequence and loading rate on the properties of the joint. The experimental results show that the parameters influence the joint performance significantly.
  • Parametric study of composite bolted joint under compressive loading
    Laxman V. Awadhani, Anand Bewoor
    Procedia Manufacturing, 2018
    Use of composite structures in various sectors is rapidly increasing. The composite materials are becoming very popular due to high strength to weight ratio, high stiffness to weight ratio, low coefficient of friction, improved appearance etc. Extensive literature is available for the behavior of composite bolted joints subjected to tensile loading for the aerospace structures. The work reported in this paper is an attempt to extend the analytical model for studying the behaviour of composite bolted joint under compressive loading. The model is capable of conducting the parametric study on the joint stiffness variation with respect to parameters such as plate width, bolt diameter and stacking sequence for compressive loading. The model is verified experimentally. The experiments were designed to study the effect of variation in the parameters on the joint stiffness. Unidirectional and bidirectional carbon fibre epoxy composite laminates were tested as per ASTM D5961. The parameters viz. stacking sequence, bolt diameter, plate width of the joint stiffness are identified as significant.
  • Analytical and experimental investigation of Effect of geometric parameters on the failure modes in a single lap single bolted metal to GFRP composite bolted joints subjected to axial tensile loading
    L.V. Awadhani, Anand K. Bewoor
    Materials Today Proceedings, 2017
  • Investigation of slip and speed ratio in axially displaceable cone variator CVT drive
    Vikrant Ullhas Garud, L. V. Awadhani, N. Vivekanandan, Amit A. Panchawadkar, Sanjay S. Lakade, Harish U. Tiwari
    International Conference on Electrical Electronics and Optimization Techniques Iceeot 2016, 2016
    A CVT has a continuous range of transmission ratios that can up to device-dependent physical limits, be selected independently of the transmitted torque so it is an object of considerable research interest within the mechanical design community, driven primarily by the automotive industry's demands for more energy efficient and environmentally friendlier vehicles as the request for better energy efficiency and for CO2 and NOx reduction, imposed by environmental considerations, pushes many researchers to find new technical solution to improve the emission performance of nowadays IC engine vehicles. Also In case of machine tools applications optimum tool life only be obtained at particular speed ratio and the same cannot be achieved due fixed gear ratios and stepped pulley transmission. Moreover, unlike conventional stepped transmissions the CVT does not suffer from “shifting shock” and also we can achieve optimum speed range at which tool life will be maximum. In this paper investigation of slip and speed ratio of axially displaceable cone variator has been studied with the help of developed test rig and the results are relate with the IC Engine and machine tool application.

RECENT SCHOLAR PUBLICATIONS

  • Static structural analysis of engine hood using natural hybrid fiber composite
    K Pandey, LV Awadhani, A Avthankar, PR Sonawane, NS Navagale
    AIP Conf. Proc. 3369, 020008 (2026) 3369 (020008) , 2026
    2026.0
  • Investigative studies on the mechanical behavior of Jute, Sisal, Hemp, and glass fiber-based composite material
    J Wagh, M Madgule, LV Awadhani
    Materials Today: Proceedings 77, 969-976 , 2023
    2023.0
    Citations: 25
  • Design and development of agricultural spraying system
    DV Honrao, LV Awadhani
    Materials Today: Proceedings 77, 734-738 , 2023
    2023.0
    Citations: 5
  • Behaviour of composite bolted joint under tension-shear and compression -shear load cases
    AKB L V Awadhani
    International review of Mechanical engineering 17 (39) , 2023
    2023.0
    Citations: 3
  • Development of Test Rig for Behaviour Study of Metal to Composite Bolted Joint under Combined Bending and Vibration Loading
    LVA Shreyash H. Khedekar1 , Aditya S. Choudhari2 , Bhavesh S. Baviskar3 ...
    International Journal for Research in Applied Science & Engineering … , 2021
    2021.0
  • Behavior of single lap composite bolted joint under traction loading: Experimental investigation
    LV Awadhani, A Bewoor
    AIP Conference Proceedings 1943 (1), 020124 , 2018
    2018.0
    Citations: 1
  • Design Modification of Ladder Chassis Frame Based on Dynamic Analysis
    P Prasad Salunke, L Awadhani
    2018.0
  • Parametric study of composite bolted joint under compressive loading
    LV Awadhani, A Bewoor
    Procedia Manufacturing 22, 186-195 , 2018
    2018.0
    Citations: 8
  • Parametric Study of Single Bolted Composite Bolted Joint Subjected to Static Tensile Loading
    LV Awadhani
    IOP Conference Series: Materials Science and Engineering 225 (1), 012215 , 2017
    2017.0
    Citations: 6
  • Analytical and experimental investigation of effect of geometric parameters on the failure modes in a single lap single bolted metal to GFRP composite bolted joints subjected …
    DAKB L.V.Awadhani
    International Conference on Advancements in Aeromechanical Materials for … , 2016
    2016.0
    Citations: 7
  • Investigation of slip and speed ratio in axially displaceable cone variator CVT drive
    VU Garud, LV Awadhani, N Vivekanandan, AA Panchawadkar, ...
    2016 International Conference on Electrical, Electronics, and Optimization … , 2016
    2016.0
    Citations: 1
  • An Investigation on effect of change in material of gear pair used in rear wiper mechanism of vehicles
    LVA Nilesh More
    International Engineering Research Journal, 1950-1954 , 2016
    2016.0
  • Investigative study of vibration induced stress analysis on motor mounting lugs
    LVA C.G. Bhore
    International journal of Engineering Research & Technology 5 (2), 677-682 , 2016
    2016.0
  • Fatigue Life Improvement of a Composite-Metal Bolted Joint of a Heavy Vehicle Cabin
    LVA S. Bharamgonda
    International Engineering Research Journal (IERJ, 1041-1044 , 2015
    2015.0
  • Effect of Viscosity on the Transmissibilty of a Magnetorheological Damper
    LVA Sandesh Solepatil
    International Journal of Science and Research, India 3 (6) , 2014
    2014.0
  • Transmissibility Analysis of Magneto Rheological Damper
    LVA Sandesh Solepatil
    International Journal of Latest Technology in Engineering , Management … , 2014
    2014.0
  • Model for Course Planning for improved Employability of Learner
    LV Awadhani, AA Panchwadkar, SK Bhoite, P Nigdi
    Cummins College Digest of Engineering Education, 51 , 0
  • Development of Test Rig for Behaviour Study of Metal to Composite Bolted Joint under Combined Bending and Vibration Loading
    SH Khedekar, AS Choudhari, BS Baviskar, CB Dhanuka, LV Awadhani
  • Experimental and Numerical Analysis of Trapezoidal Corrugated Web Beam to Determine its Strength and Mode Shapes
    MLV Awadhani

MOST CITED SCHOLAR PUBLICATIONS

  • Investigative studies on the mechanical behavior of Jute, Sisal, Hemp, and glass fiber-based composite material
    J Wagh, M Madgule, LV Awadhani
    Materials Today: Proceedings 77, 969-976 , 2023
    2023.0
    Citations: 25
  • Parametric study of composite bolted joint under compressive loading
    LV Awadhani, A Bewoor
    Procedia Manufacturing 22, 186-195 , 2018
    2018.0
    Citations: 8
  • Analytical and experimental investigation of effect of geometric parameters on the failure modes in a single lap single bolted metal to GFRP composite bolted joints subjected …
    DAKB L.V.Awadhani
    International Conference on Advancements in Aeromechanical Materials for … , 2016
    2016.0
    Citations: 7
  • Parametric Study of Single Bolted Composite Bolted Joint Subjected to Static Tensile Loading
    LV Awadhani
    IOP Conference Series: Materials Science and Engineering 225 (1), 012215 , 2017
    2017.0
    Citations: 6
  • Design and development of agricultural spraying system
    DV Honrao, LV Awadhani
    Materials Today: Proceedings 77, 734-738 , 2023
    2023.0
    Citations: 5
  • Behaviour of composite bolted joint under tension-shear and compression -shear load cases
    AKB L V Awadhani
    International review of Mechanical engineering 17 (39) , 2023
    2023.0
    Citations: 3
  • Behavior of single lap composite bolted joint under traction loading: Experimental investigation
    LV Awadhani, A Bewoor
    AIP Conference Proceedings 1943 (1), 020124 , 2018
    2018.0
    Citations: 1
  • Investigation of slip and speed ratio in axially displaceable cone variator CVT drive
    VU Garud, LV Awadhani, N Vivekanandan, AA Panchawadkar, ...
    2016 International Conference on Electrical, Electronics, and Optimization … , 2016
    2016.0
    Citations: 1
  • Static structural analysis of engine hood using natural hybrid fiber composite
    K Pandey, LV Awadhani, A Avthankar, PR Sonawane, NS Navagale
    AIP Conf. Proc. 3369, 020008 (2026) 3369 (020008) , 2026
    2026.0
  • Development of Test Rig for Behaviour Study of Metal to Composite Bolted Joint under Combined Bending and Vibration Loading
    LVA Shreyash H. Khedekar1 , Aditya S. Choudhari2 , Bhavesh S. Baviskar3 ...
    International Journal for Research in Applied Science & Engineering … , 2021
    2021.0
  • Design Modification of Ladder Chassis Frame Based on Dynamic Analysis
    P Prasad Salunke, L Awadhani
    2018.0
  • An Investigation on effect of change in material of gear pair used in rear wiper mechanism of vehicles
    LVA Nilesh More
    International Engineering Research Journal, 1950-1954 , 2016
    2016.0
  • Investigative study of vibration induced stress analysis on motor mounting lugs
    LVA C.G. Bhore
    International journal of Engineering Research & Technology 5 (2), 677-682 , 2016
    2016.0
  • Fatigue Life Improvement of a Composite-Metal Bolted Joint of a Heavy Vehicle Cabin
    LVA S. Bharamgonda
    International Engineering Research Journal (IERJ, 1041-1044 , 2015
    2015.0
  • Effect of Viscosity on the Transmissibilty of a Magnetorheological Damper
    LVA Sandesh Solepatil
    International Journal of Science and Research, India 3 (6) , 2014
    2014.0
  • Transmissibility Analysis of Magneto Rheological Damper
    LVA Sandesh Solepatil
    International Journal of Latest Technology in Engineering , Management … , 2014
    2014.0
  • Model for Course Planning for improved Employability of Learner
    LV Awadhani, AA Panchwadkar, SK Bhoite, P Nigdi
    Cummins College Digest of Engineering Education, 51 , 0
  • Development of Test Rig for Behaviour Study of Metal to Composite Bolted Joint under Combined Bending and Vibration Loading
    SH Khedekar, AS Choudhari, BS Baviskar, CB Dhanuka, LV Awadhani
  • Experimental and Numerical Analysis of Trapezoidal Corrugated Web Beam to Determine its Strength and Mode Shapes
    MLV Awadhani